USING THE VACUUM CLEANER
Variable Suction Control
The suction force can be adjusted to several settings between "MIN" and " MAX".
To strengthen the suction force, turn the variable suction control to the "MAX" position.
To weaken the suction force, turn the variable suction control to the "MIN" position.
MAX:When a strong suction force is necessary for
cleaning dust and dirt that is hard to remove.
MIN:When a weak suction force is necessary in cases
such as when you wish to clean quietly.
Variable Suction Control
MINMAX
Rug/Floor (Tools) Selector
The RUG/FLOOR(TOOLS)selector should only be adjusted while the vacuum cleaner is turned on and in the upright position.
1 |
|
| RUG | When cleaning a rug or carpet,first |
|
| |||
|
|
| turn the ON/OFF switch to the ON | |
|
|
|
| position,and then set the RUG/ |
|
|
|
| FLOOR(TOOLS)selector to the |
|
|
|
| RUG position. |
2 |
|
| FLOOR | When cleaning a bare floor or when using |
|
| |||
|
| one of the attachments,set the RUG/FLOOR | ||
|
|
|
(TOOLS)selector to the FLOOR position.
Rug/Floor (Tools)
SELECTOR
Caution: Do not change the setting of the RUG/FLOOR(TOOLS)selector while the vacuum cleaner is turned off.
Edge Cleaning
This vacuum cleaner is equipped with an "edge cleaning" function for cleaning carpet edges near baseboards and stationary furniture.
7