USING THE ATTACHMENTS
Caution: When using one of the attachments during cleaning,set the vacuum cleaner to the upright position.
Remove the attachments from the
1 vacuum cleaner.
Press the release button C to
2 disconnect the handle from the vacuum cleaner.
Caution:
Wand
Crevice Tool
Release
Button C
When removing the attachments, pull them in the directions shown in the illustration.Pulling them in the wrong direction or pulling them forcefully may cause damage to the attachment clamp.
Attach the attachments on the handle or
|
|
|
|
| Attachment Clamp |
| |
3 the suction hose B. | Upholstery | Dusting | |||||
Attach the attachments as shown below. | |||||||
|
|
| Wand | Tool | Brush | ||
|
|
| Crevice Tool |
| |||
Handle |
|
|
|
| |||
|
|
| |||||
|
|
|
|
|
|
|
|
Suction Hose A
|
|
|
|
|
|
|
| Caution: Before using the suction hose B, |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
Suction Hose B |
| |||||||
| please make sure the handle is | |||||||
|
|
|
|
|
|
|
| reattached on the body. |
Hook the hose holder onto the holder mount.
Caution:
Before using the attachments, please make sure the hose is hooked on the holder mount.
Upholstery tool & Dusting brush | Hose | Holder |
To detach the dusting brush from the upholstery tool: Press the | Holder Mount | |
Groove |
| |
tabs on the brush downward to remove it. |
| |
To reattach the dusting brush to the upholstery tool: Insert
the front of the upholstery tool under the hook on the front of the dusting brush. Press down on the back of the upholstery tool to snap it into place under the dusting brush tabs.
Tabs
When you have finished using the attachments,replace them in their original positions as shown on page 4.
8