Fantom Vacuum FM655CS instruction manual Removing the Bottom Plate, Reattaching the Bottom Plate

Page 16

REPLACEMENT INSTRUCTIONS

REMOVING THE BOTTOM PLATE

Set the vacuum cleaner to the

1 parallel position and turn it over.			Pull here
1 parallel position and turn it over.
Slide the latch in the direction	Latch	Press	Press
2 of the arrow.
Remove the bottom plate by pulling
3 the tabs as illustrated.
			Bottom Plate

REATTACHING THE BOTTOM PLATE

Insert the projection on the bottom plate

1 into the groove on the nozzle housing and set the bottom plate in place.

Bottom Plate

Projection

Groove

2 Push the bottom plate as shown.

Press

Press

3 Slide the latch in the direction shown.

Latch

Turn the vacuum over and place in the

4 upright position.

14

Image 16

Contents FM655CS Page Important Safety Instructions Read ALL Instructions Before Using this Vacuum CleanerGrounding Instructions Names of Each Part FrontrearPreparations Before USE Attaching the handleThermal Safety Device in Main Body Inserting the Power Cord PlugON/OFF Switch Using the Vacuum CleanerAdjusting the Handle Edge Cleaning RUG/FLOOR ToolsselectorUsing the Attachments Upholstery tool & Dusting brushPower cord from the wall outlet before cleaning Emptying the Dust CompartmentCleaning the Filters Cleaning UtensilClearing Blockages and Cleaning the Agitator Assembly Replacement Instructions Replacing the Headlight LampReplacing the Flat Belt Removing the Bottom Plate Reattaching the Bottom PlateCleaning the SUB-FILTER Replacing the FilterTroubleshooting Problem Cause RemedyFive 5 Year Limited Warranty