Fantom Vacuum FM655CS instruction manual Replacement Instructions, Replacing the Headlight Lamp

Page 14

REPLACEMENT INSTRUCTIONS

Caution: Be sure to turn the ON/OFF switch to the"OFF" position and disconnect the power cord from the wall outlet before replacing any of the parts below.

REPLACING THE HEADLIGHT LAMP

1 Set the vacuum cleaner to the parallel position.

2

Loosen the screws to remove the lens.

Screw

 

Lens

When removing the headlight lamp, be careful

3 not to pull on the headlight lamp wiring.

Remove the lamp by pushing it gently in

2

 

4 the direction of the arrow and then turning

 

it counterclockwise.

1

 

 

 

 

Headlight Lamp

Socket

Push a new lamp gently into the socket and

 

 

5 turn it clockwise to tighten it .

 

 

Use a standard bayonet base appliance lamp

2

 

rated at 120V and 15W (LAMP MAX.15W).

 

 

 

1

 

 

 

Socket

Caution: Be careful not to clamp the headlight lamp wiring.

6 Reattach the lens and fasten the screws.

12

Image 14
Contents FM655CS Page Important Safety Instructions Read ALL Instructions Before Using this Vacuum CleanerGrounding Instructions Names of Each Part FrontrearPreparations Before USE Attaching the handleThermal Safety Device in Main Body Inserting the Power Cord PlugAdjusting the Handle Using the Vacuum CleanerON/OFF Switch Edge Cleaning RUG/FLOOR ToolsselectorUsing the Attachments Upholstery tool & Dusting brushPower cord from the wall outlet before cleaning Emptying the Dust CompartmentCleaning the Filters Cleaning UtensilClearing Blockages and Cleaning the Agitator Assembly Replacement Instructions Replacing the Headlight LampReplacing the Flat Belt Removing the Bottom Plate Reattaching the Bottom PlateCleaning the SUB-FILTER Replacing the FilterTroubleshooting Problem Cause RemedyFive 5 Year Limited Warranty