Deltech Fitness 8000 instruction manual Boom Assembly, Coalescing Filter Element Replacement

Page 17

6.Lift the vessel out from the top. Use the boom and hoist for models 8DM100 and 8DM150; vessels for smaller models can be lifted out by hand.

7.All vessels may be discarded, except BA17 and AC17. These vessels can be returned to the factory for credit. See page 11 for return procedure.

8.Lower a new vessel into place from the top. Use the boom and hoist for models 8DM100 and 8DM150; vessels for smaller models can be low- ered by hand.

9.Close the hinged support clamps to secure the new vessel to its support bracket.

10.Connect the unions on the top and bottom of the vessel.

11.Replace all cabinet panels.

12.Record the date of change on the spare label sup- plied with the replacement vessel; stick the label to the top of the purifier.

WARNING

To restart the purifier, follow the procedure described in the Start-Up section of this man- ual.

Boom Assembly

A boom and hoist assembly are provided with Models 8DM100 and 8DM150. Use the boom and hoist to re- move and replace the activated carbon filter and cata- lyst vessel according to the Preventive Maintenance Schedule in this manual. The boom is stored inside the cabinet in the back left corner. The hoist is strapped to the bottom of the purifier cabinet frame.

To use the boom and hoist:

1.Lift the boom assembly out from the top and set it on one of the bases provided on two sides of the purifier (each base looks like a closed-off black pipe sticking up near the top of the purifier).

2.Attach the hoist to the boom hook.

3.Swing the boom hook over the vessel.

4.Attach the hoist to the handles provided on the vessel.

5.Disconnect the unions on the top and bottom of the vessel.

6.Using the hoist, lift the vessel out of the purifier cabinet.

7.Swing the boom to the side and use the hoist to lower the vessel to the floor.

8.Attach a new vessel to the hoist; using the boom assembly, lift the vessel above the cabinet and lower it into place.

9.Store the boom assembly inside the purifier cabi- net.

Coalescing Filter Element Replacement

To replace the element:

1.Shut down the purifier according to the Shutdown procedure.

2.Disconnect electrical power to the automatic drain valves.

3.Remove cabinet panels to expose filter.

4.Carefully remove black foam insulation from filter bowl and set aside.

5.Mark center drain line and outer drain line for re- connection, then disconnect the drain lines from the filter bowl.

6.Remove the threaded coalescing filter bowl from the top casting, using a strap wrench if necessary.

7.Remove the saturated element from the bowl.

8.Clean the bowl with soap and water. Do not use solvents.

9.Insert a new element in the bowl.

10.Reattach the bowl to the top casting.

11.Reattach the center and outer drain lines.

12.Replace the black foam insulation and secure it with tape.

13.Reconnect electrical power to the automatic drain valves.

14.Replace all cabinet panels.

Pyramid 8000® Series Purifiers (Bulletin 289)

13

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Pyramid 8000 Series Compressed Breathing AIR Purifiers Table of Contents Tables Labels and Figures Introduction Safety InstructionsReceiving and Inspection SafetyInstallation Clearance Ambient Air TemperatureLocation Air Compressor EquipmentElectrical Connections Purification ProcessDrain Piping Indicating Lights System Operation MonitorNormal Critical Air and Refrigerant Temperatures Temperature SCAN/SEEK Push ButtonRS-232 Serial Port Intermediate Air TemperatureRemote Alarm Contacts Optional Operation ADV AdjustmentAirflow Start-UpShutdown How to Use the Maintenance Section MaintenanceHow to Return Material to Deltech Replacement PartsCarbon or Catalyst Vessel Replacement Maintenance ProceduresCoalescing Filter Element Replacement Boom AssemblySystem Operation Monitor Programming Afterfilter Element ReplacementSymptom Possible Cause Remedy Field Service GuideSymptom Possible Cause Remedy Electrical schematic-Models 8DM25, 8DM50 and 8DM50-E75 Electrical schematic-Models 8DM75, 8DM100 and 8DM150 Electrical schematic-Models 8DM150-E5/E55 Cartridge locations-Model 8DM25 Cartridge locations-Models 8DM50 and 8DM75 Cartridge locations-Models 8DM100 and 8DM150 Models 8DM25, 8DM50 and 8DM75 Models 8DM100 and 8DM150 Deltech

8000 specifications

Deltech Fitness has long been recognized for its commitment to delivering high-quality fitness equipment, and the Deltech Fitness 8000 is no exception. This versatile and robust piece of equipment is designed to cater to both seasoned athletes and fitness enthusiasts alike, boasting an array of features and technologies that enhance the workout experience.

One of the standout characteristics of the Deltech Fitness 8000 is its sturdy construction. Built with heavy-duty steel, it offers impressive durability and stability during intense training sessions. The frame is meticulously designed to withstand rigorous workouts, ensuring that users get the most out of their routines without compromising safety.

The Deltech Fitness 8000 features a multi-functional design, allowing users to perform a variety of exercises with ease. Equipped with adjustable settings, the equipment can accommodate a wide range of workouts, including squats, bench presses, and pull-ups. This versatility makes it an ideal choice for those looking to engage in full-body training.

Incorporating advanced ergonomic design, the Deltech Fitness 8000 ensures that users maintain proper form while exercising. The adjustable components enable a tailored fit, reducing the risk of injury and promoting optimal performance. This user-centric approach not only enhances comfort but also maximizes the effectiveness of each workout.

Another noteworthy aspect of the Deltech Fitness 8000 is its emphasis on technological integration. The equipment may come equipped with features like built-in workout trackers, allowing users to monitor their progress in real-time. This capability fosters motivation and encourages users to set and achieve fitness goals.

Furthermore, the Deltech Fitness 8000 typically includes space-saving features, making it suitable for home gyms or environments with limited space. Its compact design doesn’t compromise on functionality, showing that even smaller setups can provide a comprehensive workout experience.

In summary, the Deltech Fitness 8000 stands out as a top choice for individuals committed to their fitness journey. With its robust construction, multi-functional capabilities, ergonomic design, and advanced technology integration, it empowers users to optimize their workouts while enjoying the benefits of a well-designed fitness machine. Whether you're a beginner or an experienced lifter, the Deltech Fitness 8000 promises to meet your training needs and elevate your fitness regimen.
Top Page Image Contents