Deltech Fitness 8000 Afterfilter Element Replacement, System Operation Monitor Programming

Page 18

WARNING

To restart the purifier, follow the procedure described in the Start-Up section of this man- ual.

Afterfilter Element Replacement

To replace the element:

1.Shut down the purifier according to the Shutdown procedure.

2.Open the manual drain valve at the bottom of the filter.

3.Remove the threaded bowl from the top casting.

4.Remove the wing nut and element support plate from the tie rod; the element with support core will drop.

5.Slide the used element off the support core.

6.Clean the bowl with soap and water. Do not use solvents. Dry the bowl thoroughly.

7.Insert a new element on the support core.

8.Slide the element with support core onto the tie rod.

9.Replace the element support plate and wing nut.

10.Reattach the bowl to the top casting.

11.Close the manual drain.

WARNING

To restart the purifier, follow the procedure described in the Start-Up section of this man- ual.

System Operation Monitor Programming

In some cases, such as a strong power surge from lighting, the System Operation Monitor may lose its programming. Perform the following steps to repro- gram the system operation monitor.

1.Turn the power switch to the OFF position.

2.Jumper across terminal E1 (see Figure 3) on the back of the display.

E1

Figure 3. System Operation Monitor Board Layout

3.Starting with the top button (SCAN/SEEK), press each of the four buttons on the monitor.

4.Press the PUSH TO TEST button again.

5.Press the TIME ADJUST button until the correct program is selected.

Version

Program

 

 

8S

All Models

 

 

6.Press the PUSH TO TEST button. The System Operation Monitor is now reprogrammed.

14

Pyramid 8000® Series Purifiers (Bulletin 289)

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Pyramid 8000 Series Compressed Breathing AIR Purifiers Table of Contents Tables Labels and Figures Safety Instructions IntroductionSafety InstallationReceiving and Inspection Location Ambient Air TemperatureClearance Air Compressor EquipmentPurification Process Drain PipingElectrical Connections System Operation Monitor Indicating LightsNormal Temperature SCAN/SEEK Push Button Critical Air and Refrigerant TemperaturesIntermediate Air Temperature Remote Alarm Contacts OptionalRS-232 Serial Port Airflow ADV AdjustmentOperation Start-UpShutdown How to Return Material to Deltech MaintenanceHow to Use the Maintenance Section Replacement PartsMaintenance Procedures Carbon or Catalyst Vessel ReplacementBoom Assembly Coalescing Filter Element ReplacementAfterfilter Element Replacement System Operation Monitor ProgrammingField Service Guide Symptom Possible Cause RemedySymptom Possible Cause Remedy Electrical schematic-Models 8DM25, 8DM50 and 8DM50-E75 Electrical schematic-Models 8DM75, 8DM100 and 8DM150 Electrical schematic-Models 8DM150-E5/E55 Cartridge locations-Model 8DM25 Cartridge locations-Models 8DM50 and 8DM75 Cartridge locations-Models 8DM100 and 8DM150 Models 8DM25, 8DM50 and 8DM75 Models 8DM100 and 8DM150 Deltech

8000 specifications

Deltech Fitness has long been recognized for its commitment to delivering high-quality fitness equipment, and the Deltech Fitness 8000 is no exception. This versatile and robust piece of equipment is designed to cater to both seasoned athletes and fitness enthusiasts alike, boasting an array of features and technologies that enhance the workout experience.

One of the standout characteristics of the Deltech Fitness 8000 is its sturdy construction. Built with heavy-duty steel, it offers impressive durability and stability during intense training sessions. The frame is meticulously designed to withstand rigorous workouts, ensuring that users get the most out of their routines without compromising safety.

The Deltech Fitness 8000 features a multi-functional design, allowing users to perform a variety of exercises with ease. Equipped with adjustable settings, the equipment can accommodate a wide range of workouts, including squats, bench presses, and pull-ups. This versatility makes it an ideal choice for those looking to engage in full-body training.

Incorporating advanced ergonomic design, the Deltech Fitness 8000 ensures that users maintain proper form while exercising. The adjustable components enable a tailored fit, reducing the risk of injury and promoting optimal performance. This user-centric approach not only enhances comfort but also maximizes the effectiveness of each workout.

Another noteworthy aspect of the Deltech Fitness 8000 is its emphasis on technological integration. The equipment may come equipped with features like built-in workout trackers, allowing users to monitor their progress in real-time. This capability fosters motivation and encourages users to set and achieve fitness goals.

Furthermore, the Deltech Fitness 8000 typically includes space-saving features, making it suitable for home gyms or environments with limited space. Its compact design doesn’t compromise on functionality, showing that even smaller setups can provide a comprehensive workout experience.

In summary, the Deltech Fitness 8000 stands out as a top choice for individuals committed to their fitness journey. With its robust construction, multi-functional capabilities, ergonomic design, and advanced technology integration, it empowers users to optimize their workouts while enjoying the benefits of a well-designed fitness machine. Whether you're a beginner or an experienced lifter, the Deltech Fitness 8000 promises to meet your training needs and elevate your fitness regimen.
Top Page Image Contents