Danby DPAC120061 owner manual Key Pad Functions, Indicator Lights & Display Icons

Key Pad Functions

I/O Power Switch: Turns unit On / Off.

MODE : Allows you to scroll through and select desired operating mode.

FAN : Select from three different fan speeds; Low, Medium and High, during Cool and Fan mode. Please note: During ‘Dry’ mode there is only one fan speed utilized (low) .

SWING : Allows the vertical louver grills to oscillate from side to side automatically.

TEMPERATURE /TIMER Adjust :

+: Used to adjust Clock and Timer On/Off settings forward (1 min./1hr. increments).

Used to adjust Temperature settings forward (1°C / °F increments).

-: Used to adjust Clock and Timer On/Off settings backward (1 min./1hr. increments).

Used to adjust Temperature settings backward (1°C / °F increments).

Note: This appliance allows you select the temperature scale displayed in either “Celsius” or “Fahrenheit” according to your preference.

To change temperature scale displayed on the control panel display, press both of the “Temp/Timer” adjust arrows simultaneously to alternate between “Celsius” & “Fahrenheit”.

TIMER ON : Used to initiate the AUTO ON start time.

TIMER OFF: Used to initiate the AUTO OFF stop time.

CLOCK : Allows you to initiate and/or change the “TIME OF DAY” setting. To activate clock mode both the TIMER ON and TIMER OFF buttons must be pressed simultaneously.

Indicator Lights & Display Icons

RUN: Adjacent blue indicator light illuminates to indicate selected mode is operational.

WATER FULL : A warning signal (beep) will sound and the adjacent red indicator light will flash continously indicating the internal reservoir is full. See “Internal Safety Feature” on pg.5 for additional details.

	I C O N S
MODE	FAN /SPEED
Cool	High

Dry (Dehumid.)	Medium
Fan Only
	Low
	Swing

TIME / TIMER

Clock: Illuminates when the time (hour) is being modified.

Timer On: Illuminates when the auto-ontime (hour) is being defined.

Timer Off: Illuminates when the auto-offtime (hour) is being defined.

7