Integra DPC-7.7 View Mode, Hdmi Output Setting, Progressive Setting, HD Resolution, HD Jpeg mode

Page 46

Configuring the DPC-7.7—Continued

View Mode

With this setting you can adjust the aspect of the picture so that it fits your TV screen. Due to your TV’s aspect ratio setting and the DVD’s aspect ratio, black bars may appear above and below the picture or at the sides and the aspect of the picture may be unsuitable. In this case, use this setting to adjust the aspect of the picture as you like.

Normal (default): The picture is displayed in its original aspect ratio.

View Mode 1: The picture is stretched horizontally to make it fit the height of the screen.

View Mode 2: The picture is stretched vertically to make it fit the width of the screen.

View Mode 3: The picture is stretched horizontally and vertically to make it fit the screen.

Tip:

The view mode can also be changed by using the remote controller’s [Aspect] button.

Note:

• This setting does not apply to DVD menus.

HDMI Output Setting

With this setting you can turn the HDMI video output on or off. See page 41 for more information.

On (default): Video is output by the HDMI OUT.

Off: Video is not output by the HDMI OUT.

Note:

•When this setting is set to On, video is output by the analog video outputs only when the HD Resolution is set to 480p/576p.

Progressive Setting

With this setting you can set the component video output to progressive or interlaced. While the HDMI Output Set- ting is set to On, this setting is fixed at Progressive and cannot be changed. See page 41 for more information.

Interlaced: Component video output is interlaced.

Progressive: Component video output is progressive.

Note:

•This setting can also be changed by pressing and hold- ing the Down [ ] button, and then pressing [Standby/On] button.

HD Resolution

With this setting you can set the video resolution for the

HDMI OUT.

Auto: The resolution is automatically set to the native resolution of the TV connected to the HDMI OUT.

480p (default):

720 x 480p 60 Hz

720p: 1280 x 720p 50/60 Hz

1080i: 1920 x 1080i 50/60 Hz

Tip:

When the HDMI Output Setting is set to On, you can also change this setting by using the remote controller’s [Resolution] button (see page 41).

Notes:

•Initially, the DPC-7.7 is configured to output both HDMI and analog video. However, if after changing the resolution settings there’s no picture, with the ana- log video connection or HDMI connection in place, press the [Resolution] button repeatedly to restore the picture.

•If Auto selected but the DPC-7.7 doesn’t support the TV’s native resolution, the resolution will be 480p/ 576p.

•When the resolution is set to 720p or 1080i, no video is output by the analog video outputs.

HD JPEG mode

If your TV is connected to the HDMI OUT and the HDMI resolution is set to 720p or 1080i, this setting allows you to display your JPEG pictures in high defini- tion.

On: JPEG pictures displayed in high definition.

Off: JPEG pictures displayed as normal.

Notes:

•If your TV is connected to a video output other than the HDMI OUT, or the HD Resolution set to some- thing other than 720p or 1080i, even if this setting is set to On, your JPEG pictures will not be displayed in high definition.

•When using HD JPEG, it may take a while to display each picture. And the Zoom function cannot be used. Also, onscreen status messages such as “Play” and “Stop” are not displayed.

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents DPC-7.7 Important Safety Instructions AvisPower PrecautionsInstalling this Unit Label on the right is applied on the rear panel PrecautionsFor models having a power cord with a polarized plug FCC Information for UserContents DPC-7.7 Features Supplied AccessoriesIntroduction Supported Discs IntroductionDisc Notes DPC-7.7 supports the following discsAbout this Manual DVD Region Numbers Disc Content OrganizationFunction Support MP3/WMA/JPEG CompatibilityHandling Discs Cleaning DiscsAbout WMA Storing DiscsCompressed file format used to store digital pho- tos DPC-7.7-related TerminologyJpeg Joint Photographic Experts Group Compressed digital video format used for Video CDsControls & Connectors Front PanelControls & Connectors DisplayRear Panel IR IN/OUTRemote Controller Chain Mode button Resolution buttonSetup button Aspect/Zoom button 43Installing the Remote Controller’s Batteries Before Using the DPC-7.7Using the Remote Controller Before Making Any Connections Connecting the DPC-7.7AV Cables & Connectors Optical Digital JackConnecting Your TV or Projector Connecting the DPC-7.7Compatibility of this unit with progressive-scan TVs Analog Connection Connecting an AV receiverConnecting a Stereo Amp Digital ConnectionUsing Hdmi Connecting a Component with an Hdmi InputWhat is HDMI? AV receiverVideo Connecting -compatible ComponentsHdmi & the DPC-7.7 Audio FormatsPlug the supplied power cord into AC InletControlling Other Out-of-range AV Components Controlling the DPC-7.7 When It’s Out of RangeControlling AV Components that are Out of Range Connect the IR receiver to the DPC-7.7 as shown belowPowering Up the DPC-7.7 Powering Up & Setting Up the DPC-7.7First Time Setup Basic Playback Loading & Removing DiscsLoading Discs During Playback Basic PlaybackSelecting Discs Pause To pause playback, press Pause button Starting, Pausing & Stopping PlaybackStart To start playback, press the Play Button Stop To stop playback, press the Stop ButtonDisc Navigating Disc MenusLoad and select a DVD-Video See page 25MP3, WMA, or Jpeg disc Using the Disc Navigation WindowLoad and select an audio CD or For audio CDsPlayback SelectingTitles, Chapters &Tracks by NumberPress the Stop button to stop Load and select a discLocating Specific Points in Time Frame-by-Frame Playback Fast Forward & ReverseAdjusting the Display Brightness Slow-motion PlaybackUsing Jpeg CDs Chain Mode indicator flashes on the display Using Chain ModeUsing Party Mode All discs are played consecutivelyAdvanced Playback Repeat PlaybackAdvanced Playback Random PlaybackMemory Playback Inserting New Items in the ListDeleting Items from the List Selecting Camera AnglesEditing Steps Selecting Subtitles Selecting Languages & Audio FormatsAudio Subtitle Press the Resolution button on Setting the HdmiPress the Resolution button to Turn Hdmi on or offTo resume playback, select Using Last MemoryButton once or twice Disc and press the Play butDisplaying Information ZoomingConfiguring the DPC-7.7 Picture Menu Using the Onscreen Setup MenusConfiguring the DPC-7.7 TV ShapeProgressive Setting View ModeHdmi Output Setting HD ResolutionAudio Menu Language Menu Operating Setting MenuDisplay Menu Parental Lock Change the Security CodeTV Shape-see Hdmi Output Setting-see On-Screen Language-see Initial Setup MenuLanguage Code List Selecting Other LanguagesTroubleshooting Troubleshooting Hdmi Status Mode Restoring the Default SettingsAbnormal Behavior Specifications Memo 3 4 4 2 1

DPC-7.7 specifications

The Integra DPC-7.7 is a high-performance digital preamplifier that reflects a commitment to sound quality, advanced technologies, and user-friendly design. This model is designed to meet the needs of audiophiles who demand the highest level of audio performance from their home theater or stereo systems.

One of the standout features of the DPC-7.7 is its advanced digital processing capabilities. It incorporates state-of-the-art DAC (Digital-to-Analog Converter) technology, allowing for precise audio reproduction from a variety of digital sources. The unit supports high-resolution audio formats, making it a perfect match for modern audio setups that prioritize fidelity.

Another significant characteristic of the Integra DPC-7.7 is its extensive connectivity options. With multiple HDMI inputs, optical and coaxial connectors, and USB ports, it can interface with numerous devices, including Blu-ray players, gaming consoles, and streaming devices. This versatility ensures that users can easily incorporate the DPC-7.7 into their existing setups.

The preamp also features multi-zone capability, allowing for separate audio control in different rooms of the house. This is especially beneficial for users who want to enjoy music or movies in various spaces without needing multiple systems. The intuitive remote control and mobile app compatibility further enhance the user experience, enabling easy management of settings and playback.

In terms of design, the Integra DPC-7.7 boasts a modern and elegant appearance that fits seamlessly into any home entertainment system. The high-quality build ensures durability, while also providing a premium look and feel.

Moreover, the DPC-7.7 is equipped with advanced room calibration technologies that automatically adjust the audio output based on the specific acoustics of the room. This feature ensures that users experience an optimal sound stage regardless of their listening environment.

In summary, the Integra DPC-7.7 stands out in the crowded market of digital preamplifiers due to its high-resolution audio support, comprehensive connectivity, multi-zone functionality, and advanced digital processing capabilities. Its thoughtful design and user-friendly features make it an exceptional choice for anyone looking to enhance their home audio experience. With its focus on performance and versatility, the DPC-7.7 is poised to impress even the most discerning audiophiles.
Top Page Image Contents