Remote Controller
Remote Controller
1
2
3
4
5
6
6
7
8
9 J
K
L
M
M N
AStandby/On button (19)
Sets the
BNumber buttons (20, 23, 28)
Used to select radio presets by number, and to enter AM/FM station frequencies and XM Radio channel numbers in Direct Tuning mode.
CDirect Tuning button (20, 23)
Selects the Direct Tuning mode. With AM and FM, you can select a station directly by entering its fre- quency. With XM, you can select a station directly by entering its channel number.
DReturn button (28)
Returns to the previous display.
EArrow [
]/[ ]/[
]/[
] buttons (12, 22–25, 28)
With AM and FM, the Up and Down [
]/[ ] but- tons are used for tuning. With XM Radio, the Up and Down [
]/[ ] buttons are used to select chan- nels.
The Left and Right [
]/[
] buttons are used to select category.
FPreset
Used to select radio presets.
GAuto Scan button (26, 27)
Starts the Auto Scan function, which selects and outputs each radio preset in turn for 5 seconds.
HBand button (19, 22)
Used to select radio bands, AM, FM, and so on. The bands available depends on the type of tuner board installed.
IDisplay button (24, 26)
Used to view various information on the display.
JDimmer button (9)
Adjusts the display brightness.
KEnt and Enter buttons (12, 22–25, 28)
Used to confirm various functions and settings. Also used to select secondary multicast channels with HD Radio stations.
LSetup button (12, 22, 24, 28)
Selects Setup mode.
MTuning/CH [
]/[
] buttons (19, 23)
With AM and FM, these buttons are used for tuning. With XM Radio, they’re used to select stations.
NTuning Mode button (19, 23)
With AM and FM, this button selects the Auto or Manual tuning mode. With XM Radio, it selects the search modes.
*XM Radio/HD Radio reception requires
11