Integra TUN-3.7 Using Presets, Presetting Your Favorite Stations, Selecting Presets

Using Presets

Auto Scan	Memory
Preset /	Tuning Mode

Preset –/+

Auto Scan

Presetting Your Favorite Stations

You can store any combination of up to 40 of your favorite AM, FM, and XM Satellite radio stations as presets.

■Using the TUN-3.7:

1Tune into the station that you want to store as a preset.

2Press the [Memory] button.

The MEMORY indicator appears and the preset number flashes.

3	While the MEMORY indicator is
	displayed (about 8 seconds), use
	the Preset [ ]/[ ] buttons to
	select a preset from 1 through 40.
4	Press the [Memory] button again
	to store the station or channel.
	The station or channel is stored and the
	preset number stops flashing.
	Repeat this procedure for all of your
	favorite radio stations.

Selecting Presets

■Using the Preset buttons:

To select a preset, use the TUN-3.7’s Preset []/[ ] buttons, or the remote controller’s Preset [+]/[–] buttons.

Remote controller

■Using the Auto Scan function:

Press the [Auto Scan] button.

The Auto Scan function automatically

selects and outputs each radio preset in turn for 5 seconds.

Remote controller When you hear the station that you

want to listen to, press the [Auto Scan] button again to stop auto scanning.

Deleting Presets

■Using the TUN-3.7:

1Select the preset that you want to delete.

See the previous section.

2While holding down the [Mem-

ory] button, press the [Tuning Mode] button.

The preset is deleted and its number disappears from the display.

27