Integra instruction manual Changing the Remote ID, Changing the TUN-3.7’s Remote ID

Changing the Remote ID

If the TUN-3.7’s remote controller interferes with other Integra/Onkyo components located in the same room, you can change the remote control ID. You can select remote control ID #1, #2, or #3. By default, the remote control ID is set to #1. If you change the ID, you must also change the ID on the remote controller to match, as explained below, otherwise, the remote controller won’t work.

Number buttons

Return	Setup
/ / /	Enter

Changing the TUN-3.7’s Remote ID

1	Press the [Setup] button.
Remote controller

2	Use the Up and Down Arrow
Remote controller	[ ]/[	] buttons to select “Hard-
	ware Setup,” and then press
	[Enter].
	With some tuner boards, there will
	only be one option available and you
	won’t need to use the Up and Down
	Arrow [	]/[ ] buttons.

4	Use the Left and Right Arrow
Remote controller	[ ]/[ ] buttons to change the
	remote ID.
	You can select ID #1 (default), #2, or
	#3.
5	Press the [Setup] button.
Remote controller	Once you’ve changed the TUN-3.7’s
	remote ID, the remote controller will
	no longer control the TUN-3.7, so you
	must change the remote controller’s ID
	to match, as explained below.
Changing the Remote Controller’s ID
1	Before changing the remote con-
	troller’s ID, change the TUN-3.7’s
	ID first (see above).
2	Press the remote controller’s
Remote controller	[Return] button.
3	While pressing and holding
Remote controller	down the remote controller’s

[Return] button, press number button [1], [2], or [3] for 3 sec- onds to select ID #1, #2, or #3 respectively.

4	Check whether the remote con-
	troller operates the TUN-3.7
	properly.

3

Remote controller

Use the Up and Down Arrow []/[ ] buttons to select “Remote ID.”

With some tuner boards, there will only be one option available and you won’t need to use the Up and Down Arrow []/[ ] buttons.

Note:

•The remote controller and TUN-3.7 must be set to the same remote control ID. Otherwise, you won’t be able to control the TUN-3.7 with the remote control- ler.

28