Integra instruction manual Connecting the DPC-7.5 Connecting Your TV or Projector, Lets

Connecting the DPC-7.5—Continued

Connecting Your TV or Projector

This section explains how to connect the DPC-7.5 to your TV or projector.

In this hookup example, the TV handles the audio and video. If your TV has a Dolby Pro Logic decoder built-in, you’ll be able to enjoy DVDs and videos that bear the Dolby Surround logo.

To enjoy Dolby Digital or DTS (5.1-channel surround), you’ll need a compatible decoder (see page 18).

The DPC-7.5 has three types of video output: component video, S-Video, and composite video. Component video offers the best picture quality, so if your TV supports it, use a commercially available component video cable to connect the DPC-7.5’s COMPONENT video output to the compo- nent video inputs on your TV. If your TV supports progres- sive scanning, you must use component video in order to take advantage of that feature.

TV or projector

L	IN
R	Y
INPUT	VIDEO IN
	S VIDEO IN
ANALOG
(red)	PB

S-Video offers better picture quality than composite video, so if your TV supports it, use the supplied S-Video cable to connect the DPC-7.5’s S VIDEO output to an S-Video input on your TV. Failing that, use the supplied composite video cable to connect the DPC-7.5’s VIDEO output to a composite video input on your TV.

1	Turn off the DPC-7.5 and your TV, and dis-
	connect their power cords from the wall out-
	lets.
2	Connect the DPC-7.5 to your TV as shown.
3	When you’ve completed all connections, see
	“Powering Up & Setting Up the DPC-7.5” on

page 21.

*1 The DPC-7.5 has two composite video out- put connectors and two pairs of stereo ana- log audio output connectors. They output the same video and audio signals respectively.

*2 The DPC-7.5 has two S-Video output con- nectors. They output the same video signal.

*3 The DPC-7.5 has two component video out- puts. The COMPONENT 1 output uses RCA/phono connectors. The COMPO- NENT 2 output uses BNC connectors. They output the same video signal.

(white)

(yellow)

PR

AV RCA/phono cable (supplied)*1

(red)

(white)

Component video cable*3

S-Video cable
(supplied)*2	Signal flow
	Only one connection required!
	Choose component video,
(yellow)	S-Video, or composite video.

		VIDEO OUTPUT
	COMPONENT 2
Y		PB	PR
						DVD CHANGER
				AUDIO OUTPUT		MODEL NO. DPC-7.5
	COMPONENT 1					RS 232
			S VIDEO	DIGITAL
Y	PB	PR		OPTICAL	COAXIAL	AC INLET

AUDIO OUTPUT

ANALOG	VIDEO
L	IN
	IR
R	OUT	REMOTE
		CONTROL

Notes

•Before making any connections, turn off the DPC-7.5 and your TV and disconnect their power cords from the wall outlets.

•Also refer to the connection information supplied with your TV.

•Connect the DPC-7.5’s video outputs directly to your TV. Don’t connect a VCR or other video equipment in between your DPC-7.5 and TV. Doing so may result in picture dis- tortion, because of the copy protection system used on DVD-Videos.

•When you use the analog audio outputs, don’t play DTS CDs and don’t select DTS soundtracks on DVD-Videos. Doing so will produce unpleasant digital noise, which may damage your equipment.

•If your TV or projector has BNC component video inputs, use a BNC component video cable to connect them to the DPC-7.5’s BNC component video outputs.

17