Integra instruction manual Connecting the DPC-7.5 Connecting -compatible AV Components

Connecting the DPC-7.5—Continued

Connecting -compatible AV

Components

With (Remote Interactive) you can control your DPC-7.5 by using the remote controller supplied with your Onkyo or Integra -compatible AV receiver.

Integra/Onkyo AV receiver

REMOTE	DIGITAL IN
	OPTICAL
CONTROL
L

R

ANALOG

INPUT

Plug the supplied power cord into the AC INLET

•Do not use a power cord other than the one supplied with the DPC-7.5. The power cord supplied is designed for use with the DPC-7.5 and should not be used with any other device.

•Never have the power cord disconnected from the DPC-7.5 while the other end is plugged into the wall outlet. Doing so may cause an electric shock. Always connect by plug- ging into the wall outlet last and disconnect by unplugging from the wall outlet first.

ANGER

DPC-7.5

AC INLET

To use you must make an analog RCA/phono connection between the DPC-7.5 and the other component even if they are connected digitally.

cable (Supplied)

AUDIO OUTPUT

ANALOG

L

R

VIDEO OUTPUT

	COMPONENT 2
Y	PB		PR
	COMPONENT 1
Y	PB	PR	S VIDEO

AUDIO OUTPUT

ANALOG VIDEO

LIN

IR

ROUT

AUDIO OUTPUT

DIGITAL

OPTICAL COAXIAL

REMOTE

CONTROL

DVD CHANGER

MODEL NO. DPC-7.5

AUDIO OUTPUT RS 232

DIGITAL

OPTICAL COAXIAL

REMOTE

CONTROL

Notes:

•Push the plugs in all the way to make a good connection.

•Use only cables for connections.

•To use you must also make an analog RCA/phono connection between your DPC-7.5 and Integra/Onkyo AV receiver, even if they are connected digitally.

•The DPC-7.5 has two connectors. You can connect either one to your Integra/Onkyo AV receiver. The other connector is for connecting additional -compatible components.

•Connect the DPC-7.5’s connector to only Integra/ Onkyo AV components. Connecting to other manufac- turer’s AV components may cause them to malfunction.

19