Integra DTM-5.3 Connecting the remote zone Zone, Zone 2 connections, Zone 2 Control Selector

Page 14

Connecting the remote zone (Zone 2)

Connecting the remote zone (Zone 2)

The DTM-5.3 allows you to connect an additional set of speakers and place them in a different room or an area separated for listening to music. This other room or area is referred to as the remote zone (Zone 2), while the room in which the DTM-5.3 is referred to as the main zone. In addition, the IR IN/OUT allows you to control the DTM-5.3 from the remote zone (Zone 2) using the remote controller, even though the remote zone may be physically separated. The diagram illustrates the proper connections for the remote zone.

Zone 2 connections

The ZONE 2 OUT terminal provides constant output. Connect to the LINE input of the ampliﬁer (CD, tape, etc.). Adjust the volume with the ampliﬁer connected to the ZONE 2 OUT terminal.

1Connect the DTM-5.3 to the ampliﬁer for the remote zone.

2Connect the remote zone speaker cables to the speaker terminals on the ampliﬁer.

Zone 2 Control Selector

When you use the A-BUS system, switch the ZONE 2 CONTROL SELECTOR to A-BUS (left side). When you use an IR controller, switch the Zone 2 CONTROL SELECTOR to IR (right side).

A-BUS				IR	A-BUS				IR
A-BUS				IR	A-BUS				IR

Adjust the volume level at the ampliﬁer.

	Zone 2 Left speaker	Zone 2 Right speaker
	Zone 2 amplifier
		ZONE 2
		OUT
		L
	Left (white)	R
	Left (white)	DTM-5.3
		DTM-5.3
	Right (red)

14

Image 14

Contents Facilities and connections ContentsBefore using Setup and operationImportant Safeguards AVISFor Canadian model PrecautionsFor U.S. model Modèle pour les CanadienFeatures Supplied accessoriesRemote controller description Facilities and connectionsRemote control sensor Display Standby indicatorZone 2 button and indicator, Off button Front panel descriptionMaster Volume dial Direct Tuning buttonAlphabetic letters/symbols buttons Tuning buttonsA-BUSREADY Rear panel descriptionZONE 2 CONTROL SELECTOR ZONE 2 OUTVIDEO IN/OUT REMOTE CONTROLRear panel description MONITOR OUTConnecting components Example of audio equipment connectionConnecting components Example of video equipment connectionsConnecting the speaker cable Connecting speakersConnecting the speaker Connecting a subwooferConnecting an FM outdoor antenna Connecting antennasConnecting the AM antenna cable Connecting the included antennasZone 2 Control Selector Connecting the remote zone ZoneZone 2 connections DTM-5.3 from connecting block Mini plug cableOUT DTM-5.3 On button Standby button Connecting the powerStandby indicator Standby/On button Remote controller operation Installing the remote controller batteriesInstalling the batteries Direct change function Basic operationsListening to your favorite source Sleep function Remote controller only Listening using the headphonesMute function Remote controller only Basic operationsReceiving stations Tuning the radio Manual tuningTuning the radio Direct tuning Programming radio stations Receiving stationsListening to stereo radio stations FM only Preset Selecting preset stationsCancelling preset stations Receiving stationsEntering characters Cleaning all charactersEntering station names Changing an entered characterTape-to-Tapedubbing Recording a sourceRecording an audio source VCR VIDEO Recording a sourceDTM-5.3 DTM-5.3Monitoring during recording Using Tape 2 MonitorUsing a graphic equalizer Zone 2 A-BUSor IR operation in the zone 2 room Enjoying music in the remote zoneZone 2 operation from the main room Checking the remote controller’s ID Using the remote controllerSetting the ID number Programming the ID numberControlling an Integra/Onkyo DVD player Controlling other componentsControlling an Integra/Onkyo CD player Controlling other components Controlling an Integra/Onkyo cassette tape deckTrouble Troubleshooting guideAppendix CauseAMPLIFIER SECTION REMOTE CONTROLLER RC-477SSpeciﬁcations GENERAL