Horizontal Discharge

Horizontal Air Discharge Condensing Units 4 to 13 HP Standard and Optional Features

•Floating Tube™ coil design

•Rifled copper condenser tubing

•Designed for use with R-404A, R-507

•Prebent copper tubes minimize welded joints on internal piping

•Fixed high and adjustable low pressure controls.

•Oil safety control

•Head pressure control valve

•Bitzer compressors with POE oil

•Spring mounted compressor with suction and discharge vibration eliminators

•Crankcase heater

•Thermally protected, permanently lubricated ball bearing condenser fan motors

•Separate subcooling circuit in condenser for added capacity and vapor-free liquid

•Pressure relief valve on receiver

•Sealed liquid line filter drier and sight glass

•Electrical controls, including compressor contactor and optional defrost control, are located in easily accessible control box with a hinged cover

•Service Mate™ module to assist troubleshooting

•Pumpdown Switch

•Cabinet is constructed from prepainted galvanized steel

•Base valve and high & low pressure taps on outside of unit

•Vertical receivers

Factory-Installed Options

•Oversized receiver

•Replaceable core liquid filter drier

•Liquid line solenoid valve

•Suction filter

•Replaceable core suction filter

•Suction accumulator

•Oil separator

•Air defrost timer

•Electric defrost kits, including timer, evaporator fan contactor with fusing, defrost heater contactor(s), lockout relay and terminal strip

•Fusing for defrost kits

•Evaporator holdout relays for systems with multiple electric defrost evaporators

•Low ambient kit with heated and insulated receiver with time delay

•Fused disconnect switch

•Non-fused disconnect switch

•Phase-loss monitor

•Manual-reset high pressure switch

•Anti-short cycle timer

•Compressor circuit breakers

•Condenser fan cycling

•Coated condenser coils

•Copper finned coil

•Beacon II™ compatible

•Hail guards (shipped loose)

•Compressor unloading

•NEMA contactors

•12" extended legs for snowbelt region (shipped loose)

•Slanted louver for snowbelt regions (shipped loose)

•Dual pressure control

Nomenclature

C	B	T	0000	L	6	C
Brand	Compressor	Application	Horsepower	Temp. Range	Refrigerant	Voltage

Climate Control

B = Bitzer

T = Outdoor

N = Indoor

S = Beacon II™

0401 - 4

0551 - 5

0601 - 6

0611 -6

0751 - 7.5

0901 - 9

1001 - 10

1201 - 12

1301 - 13

M = Med. Temp.

L = Low Temp.

6 = R-404A,

R-507

C = 208-230/3/60 D = 460/3/60

E = 575/3/60