Technical Specifications
Maximum heater plate temperature | 185°F (85°C) |
Temperature | 199°F (93°C) |
Maximum gas temperature | 106°F (41°C) |
Dimensions (H x W x D) | Docking station and water chamber: 5.0” x 6.7” x 8.3” (130 mm x |
| 170 mm x 212 mm) |
Weight | Docking station and unfilled water chamber: 1.6 lb (732g) |
Water capacity | To maximum fill line: 390 mL |
Power supply | Input range for ResMed S8 flow generator with H4i: |
| 50/60Hz; 110V, 400Hz; 2.5A <140 VA (110 W) (max. power |
| consumption) Instantaneous peak power consumption <340 VA* |
| Maximum heater element power: 85 W |
Docking station | Flame retardant engineering thermoplastic, plated cast aluminium |
Water chamber | Injection molded plastic, stainless steel and silicon seal |
Operating temperature | +41°F to +95°F (+5°C to +35°C) |
Operating humidity | |
Storage and transport temperature | |
Storage and transport humidity | |
IEC | Class II (double insulation), Type CF |
Electromagnetic compatibility | Please refer to your flow generator user's manual for details |
*Actual average power consumption will vary depending on factors such as temperature setting, set pressure, the use of accessories, height above sea level and ambient temperature.
Humidifier Performance
The following settings have been tested at 22°C, 40% RH ambient conditions:
CPAP Mask Pressure |
| RH Output % | Nominal System Output AH*, BTPS† | |
cm H2O | Setting 3 | Setting 6 | Setting 3 | Setting 6 |
4 | >95 | >95 | 16 | 20 |
|
|
|
|
|
10 | >85 | >95 | 14 | 18 |
|
|
|
|
|
20 | >75 | >85 | 13 | 16 |
|
|
|
|
|
*AH- Absolute Humidity in mg/L.
†BTPS- Body Temperature Pressure Saturated.
Note: The manufacturer reserves the right to change these specifications without notice.
Symbols which appear on the device
Attention, consult accompanying documents; | Type CF equipment; | ||
Class II equipment; | Hot surface; | Do not touch; | |
Maximum water level.
English |
Technical Specifications | 9 |