U-Line CO1175, SP18 manual Self-Closing Doors, 175 mm

Page 14

8 Self-Closing Doors

Door Alignment and Adjustment

Align and adjust the door if it is not level, or is not sealing properly. If the door is not sealed the unit may not cool properly, or excessive frost may form in the interior.

IMPORTANT

•Properly aligned, the door’s gasket should be firmly in contact with the cabinet all the way around the door (no gaps). Carefully examine the door’s gasket to ensure that it is firmly in contact with the cabinet. Also make sure the door gasket is not pinched on the hinge side of the door.

•The door will not be flush with the top of the cabinet. The top edge of the door will be 1/8 in. (3.175 mm) below the cabinet top.

1/8"

(3.175 mm)

To align and adjust the door:

1.Compare the top edge of the door (opposite the hinges) to the top edge of the cabinet and note the type (up or down) of adjustment needed.

1

2 3

2.Remove the top hinge pivot pin with a Phillips screwdriver and lift door off bottom hinge pin. Be careful not to lose the door closer insert sets.

3.Turn the door upside down and inspect the hinge plate mounting holes. The plate has slotted mounting holes. Loosen but do not remove the two hinge plate screws(1).

4.If door edge opposite the hinges needs to move up, move plate toward outside of door(2). If door edge needs to move down, move plate toward inside of door(3). Repeat until top edge of door is parallel with top of cabinet and tighten screws (1) securely.

4

5.After adjustment is complete, remove the door closers from the bottom hinge, clean thoroughly and apply petroleum jelly to the mating surfaces of the closers. Be sure that pins on closers align with holes in the door and bottom cabinet hinge plates. Mount door and install top hinge pivot pin.

Door Reversability

Location of the unit may make it desirable to mount the door on the opposite side of the cabinet.

Models with black and white doors are field-reversible.

Stainless steel models must be ordered right- or left-hand hinged.

Reversing the door

The Hinge hardware will be removed and reinstalled on the opposite side of the cabinet.

The top hinge hardware will be reinstalled on the bottom of the opposite side of the cabinet.

The bottom hinge hardware will be reinstalled on the top of the opposite side of the cabinet.

11

U-Line Self-Closing Door Alignment and Reversal

Page 13 Page 15
Image 14
Page 13 Page 15
Contents USE and Care Guide Introduction Read and save this Use and Care GuidePlease Record Your Model Information Line Use and Care Guide Table of Contents Safety Precautions Safety Alert DefinitionsGeneral Precautions CO1175 and BI2115 Model Feature Ice Makers FeatureCombo Models Feature BI2115 Model FeaturesControl Dial Air FlowInitial Startup Product OperationChecking Product Temperature Adjusting AirTemperatureAdjusting Ice Harvest To check the actual product temperature in the unitIce Maker Ice Maker AdjustmentIce Maker Operation Leveling Removing and Installing Interior ShelvesMaintenance Installing the grille Removing and Installing GrilleRemoving and Installing Door Shelves Reversing the door Door Alignment and AdjustmentDoor Reversability Standard DoorsInstall top hinge, and door Install bottom hingePrepare door for reinstallation For black or white doors Prepare door for reinstallationSelf-Closing Doors 175 mmReinstall Hole Plugs Reinstall hinge to bottom oppositeReinstall hinge to top opposite Install DoorCleaning Exterior CleaningInterior Cleaning DefrostingProduct Disposal Condensor CleaningStorage, Vacation and Moving Interval Every Six MonthsReplacement Parts Before Calling for ServiceIf Service is Required Troubleshooting GuideLine Corporation Limited Warranty He Built-In Undercounter Leader Since
Related manuals
Manual 20 pages 20.91 Kb Manual 19 pages 26.88 Kb

SP18, CO1175 specifications

U-Line has been a pioneer in the field of undercounter refrigeration, and its SP18, BI98, and BI95 models stand out for their exceptional performance, innovative technologies, and versatile designs, making them highly sought after by both homeowners and professionals alike.

The U-Line SP18 model is crafted for those seeking a compact yet powerful solution to enhance their kitchen or entertainment area. This unit is designed to hold up to 42 cans, with a storage capability that can handle various beverages. One of the standout features is its digital temperature control that enables precise adjustments ranging from 34°F to 65°F, ensuring that your beverages are served at optimal temperatures. The glass door is an aesthetically pleasing element that also offers UV protection, preventing the degradation of your drinks due to light exposure.

Transitioning to the BI98 model, this unit is designed for built-in applications, allowing for seamless integration into cabinetry. The BI98 boasts an impressive capacity of 98 cans, making it ideal for larger gatherings or for households that stock up on beverages. One of its key technologies is the dual-zone cooling system, which allows users to independently control the temperatures in two separate sections, catering to different types of beverages at their ideal serving temperatures. This flexibility is especially beneficial for parties or when hosting multiple guests.

The BI95 is another remarkable addition to U-Line's lineup, designed specifically for those who prioritize versatility and efficiency. This model offers a slightly smaller capacity than the BI98, capable of holding around 95 cans. However, it compensates with advanced features like energy-efficient IntelliCold technology. This ensures that the compressor runs only when needed, maintaining consistent temperatures while minimizing energy consumption. The BI95 also features a sleek stainless-steel finish and a reversible door, enhancing its adaptability to various kitchen layouts and styles.

All three models come equipped with LED lighting that beautifully illuminates the interior, allowing for easy visibility and selection of beverages. The quiet operation of these models ensures that they can be placed in any living space without disruptive noise. U-Line's commitment to quality and functionality is evident across the SP18, BI98, and BI95, making these models staples for modern kitchens and entertainment spaces. Their combination of aesthetics, innovative technologies, and thoughtful design provides an unparalleled experience in beverage preservation and accessibility.
Top Page Image Contents