U-Line SP18 manual Remove door, Remove hole plugs, Remove existing top hinge, Reinstall Hole Plugs

Page 15

To reverse the door:

 

1

3

 

2

 

Remove door:

1.Hold door to keep it from falling.

2.Remove hinge screw pin (1) from top hinge using a Phillips screwdriver.

3.Remove door by tilting forward and lifting door off bottom hinge closer inserts.

4.Reinstall hinge screw pin (1) into top hinge using a Phillips screwdriver.

Remove hole plugs.

Remove plastic screw plugs (three each, top and bottom) (3) from new hinge location. Save for reinstallation later.

Remove existing top hinge.

Remove existing top hinge (three screws) (2).

4

4

Reinstall hinge to bottom opposite.

1.Install the hinge just removed from the top to the BOTTOM opposite side of the cabinet (three screws) (2).

2.Remove the two door closer inserts (4) from the existing bottom hinge.

3.Install door closer inserts as shown on the new bottom hinge

(4).

Remove existing bottom hinge.

Remove the existing bottom hinge (three screws) (2).

Reinstall hinge to top opposite.

Install the hinge just removed from the bottom to the TOP opposite side of the cabinet (three screws) (2).

Reinstall Hole Plugs.

Install plastic screw plugs (three each, top and bottom) (3) into holes where hinge hardware was removed.

1

NOTCH 5

Prepare door for reinstallation.

1.Remove plastic hole plug from top of door handle and reinstall on opposite side.

2.With bottom of door facing up, remove pivot plate (5) (two screws).

3.Flip over and install pivot plate on opposite side of door. Ensure notch in plate faces center.

Install Door.

1.Hold door upright and tilted forward.

2.Lift door on to bottom hinge closer inserts.

3.Tilt door forward into position.

4.Hold door to keep it from falling.

5.Reinstall hinge screw pin (1) into top hinge using a Phillips screwdriver.

Align and adjust the door:

Align and adjust the door, see DOOR ALIGNMENT AND ADJUSTMENT above.

U-Line Self-Closing Door Alignment and Reversal

12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents USE and Care Guide Read and save this Use and Care Guide Please Record Your Model InformationIntroduction Line Use and Care Guide Table of Contents Safety Alert Definitions General PrecautionsSafety Precautions BI2115 Model Features Ice Makers FeatureCombo Models Feature CO1175 and BI2115 Model FeatureProduct Operation Air FlowInitial Startup Control DialTo check the actual product temperature in the unit Adjusting AirTemperatureAdjusting Ice Harvest Checking Product TemperatureIce Maker Adjustment Ice Maker OperationIce Maker Removing and Installing Interior Shelves MaintenanceLeveling Removing and Installing Grille Removing and Installing Door ShelvesInstalling the grille Standard Doors Door Alignment and AdjustmentDoor Reversability Reversing the doorPrepare door for reinstallation Install bottom hingePrepare door for reinstallation For black or white doors Install top hinge, and door175 mm Self-Closing DoorsInstall Door Reinstall hinge to bottom oppositeReinstall hinge to top opposite Reinstall Hole PlugsDefrosting Exterior CleaningInterior Cleaning CleaningInterval Every Six Months Condensor CleaningStorage, Vacation and Moving Product DisposalTroubleshooting Guide Before Calling for ServiceIf Service is Required Replacement PartsLine Corporation Limited Warranty He Built-In Undercounter Leader Since
Related manuals
Manual 20 pages 20.91 Kb Manual 19 pages 26.88 Kb

SP18, CO1175 specifications

U-Line has been a pioneer in the field of undercounter refrigeration, and its SP18, BI98, and BI95 models stand out for their exceptional performance, innovative technologies, and versatile designs, making them highly sought after by both homeowners and professionals alike.

The U-Line SP18 model is crafted for those seeking a compact yet powerful solution to enhance their kitchen or entertainment area. This unit is designed to hold up to 42 cans, with a storage capability that can handle various beverages. One of the standout features is its digital temperature control that enables precise adjustments ranging from 34°F to 65°F, ensuring that your beverages are served at optimal temperatures. The glass door is an aesthetically pleasing element that also offers UV protection, preventing the degradation of your drinks due to light exposure.

Transitioning to the BI98 model, this unit is designed for built-in applications, allowing for seamless integration into cabinetry. The BI98 boasts an impressive capacity of 98 cans, making it ideal for larger gatherings or for households that stock up on beverages. One of its key technologies is the dual-zone cooling system, which allows users to independently control the temperatures in two separate sections, catering to different types of beverages at their ideal serving temperatures. This flexibility is especially beneficial for parties or when hosting multiple guests.

The BI95 is another remarkable addition to U-Line's lineup, designed specifically for those who prioritize versatility and efficiency. This model offers a slightly smaller capacity than the BI98, capable of holding around 95 cans. However, it compensates with advanced features like energy-efficient IntelliCold technology. This ensures that the compressor runs only when needed, maintaining consistent temperatures while minimizing energy consumption. The BI95 also features a sleek stainless-steel finish and a reversible door, enhancing its adaptability to various kitchen layouts and styles.

All three models come equipped with LED lighting that beautifully illuminates the interior, allowing for easy visibility and selection of beverages. The quiet operation of these models ensures that they can be placed in any living space without disruptive noise. U-Line's commitment to quality and functionality is evident across the SP18, BI98, and BI95, making these models staples for modern kitchens and entertainment spaces. Their combination of aesthetics, innovative technologies, and thoughtful design provides an unparalleled experience in beverage preservation and accessibility.
Top Page Image Contents