U-Line CO1175, SP18 Adjusting AirTemperature, Adjusting Ice Harvest, Checking Product Temperature

Page 8

Adjusting AirTemperature

Combo Models

IMPORTANT

•Adjust the set point temperature in single increments, and wait 24 hours for the temperature to stabilize before rechecking.

•Factory recommended set-point is MID setting on dial control.

To adjust the set point temperature:

Adjust the temperature by turning the numbered dial (1) in small increments.

12

Adjusting Ice Harvest

BI Models

1.Remove the front grille (see MAINTENANCE).

2.Turn the adjusting screw (3) using a flat tip screwdriver in a small increment clockwise for a COLDER setting (slower ice production) or counterclockwise for a WARMER setting (faster ice production).

3.Replace the front grille (two screws).

C

 

 

O

R

 

 

LDE

3

 

 

Checking Product Temperature

To check the actual product temperature in the unit.

1.Partially fill a plastic (nonbreakable) bottle with water.

2.Insert an accurate thermometer.

3.Tighten the bottle cap securely.

4.Place the bottle in the desired area for 24 hours.

5.Avoid opening the unit during the testing period.

6.After 24 hours, check the temperature of the water. If required, adjust the temperature control in a small increment (See

ADJUSTING TEMPERATURE).

Causes which affect the internal temperatures of the cabinet include:

•Temperature setting.

•Ambient temperature where installed.

•Installation in direct sunlight or near a heat source.

•The number of door openings and the time the door is open.

•The time the internal light is illuminated. (This mainly affects product on the top rack or shelf.)

•The front grille or condenser are obstructed.

5

U-Line Product Operation

Page 7 Page 9
Image 8
Page 7 Page 9
Contents USE and Care Guide Introduction Read and save this Use and Care GuidePlease Record Your Model Information Line Use and Care Guide Table of Contents Safety Precautions Safety Alert DefinitionsGeneral Precautions Ice Makers Feature Combo Models FeatureCO1175 and BI2115 Model Feature BI2115 Model FeaturesAir Flow Initial StartupControl Dial Product OperationAdjusting AirTemperature Adjusting Ice HarvestChecking Product Temperature To check the actual product temperature in the unitIce Maker Ice Maker AdjustmentIce Maker Operation Leveling Removing and Installing Interior ShelvesMaintenance Installing the grille Removing and Installing GrilleRemoving and Installing Door Shelves Door Alignment and Adjustment Door ReversabilityReversing the door Standard DoorsInstall bottom hinge Prepare door for reinstallation For black or white doorsInstall top hinge, and door Prepare door for reinstallationSelf-Closing Doors 175 mmReinstall hinge to bottom opposite Reinstall hinge to top oppositeReinstall Hole Plugs Install DoorExterior Cleaning Interior CleaningCleaning DefrostingCondensor Cleaning Storage, Vacation and MovingProduct Disposal Interval Every Six MonthsBefore Calling for Service If Service is RequiredReplacement Parts Troubleshooting GuideLine Corporation Limited Warranty He Built-In Undercounter Leader Since
Related manuals
Manual 20 pages 20.91 Kb Manual 19 pages 26.88 Kb

SP18, CO1175 specifications

U-Line has been a pioneer in the field of undercounter refrigeration, and its SP18, BI98, and BI95 models stand out for their exceptional performance, innovative technologies, and versatile designs, making them highly sought after by both homeowners and professionals alike.

The U-Line SP18 model is crafted for those seeking a compact yet powerful solution to enhance their kitchen or entertainment area. This unit is designed to hold up to 42 cans, with a storage capability that can handle various beverages. One of the standout features is its digital temperature control that enables precise adjustments ranging from 34°F to 65°F, ensuring that your beverages are served at optimal temperatures. The glass door is an aesthetically pleasing element that also offers UV protection, preventing the degradation of your drinks due to light exposure.

Transitioning to the BI98 model, this unit is designed for built-in applications, allowing for seamless integration into cabinetry. The BI98 boasts an impressive capacity of 98 cans, making it ideal for larger gatherings or for households that stock up on beverages. One of its key technologies is the dual-zone cooling system, which allows users to independently control the temperatures in two separate sections, catering to different types of beverages at their ideal serving temperatures. This flexibility is especially beneficial for parties or when hosting multiple guests.

The BI95 is another remarkable addition to U-Line's lineup, designed specifically for those who prioritize versatility and efficiency. This model offers a slightly smaller capacity than the BI98, capable of holding around 95 cans. However, it compensates with advanced features like energy-efficient IntelliCold technology. This ensures that the compressor runs only when needed, maintaining consistent temperatures while minimizing energy consumption. The BI95 also features a sleek stainless-steel finish and a reversible door, enhancing its adaptability to various kitchen layouts and styles.

All three models come equipped with LED lighting that beautifully illuminates the interior, allowing for easy visibility and selection of beverages. The quiet operation of these models ensures that they can be placed in any living space without disruptive noise. U-Line's commitment to quality and functionality is evident across the SP18, BI98, and BI95, making these models staples for modern kitchens and entertainment spaces. Their combination of aesthetics, innovative technologies, and thoughtful design provides an unparalleled experience in beverage preservation and accessibility.
Top Page Image Contents