U-Line CO1175, SP18 manual Exterior Cleaning, Interior Cleaning, Defrosting

Page 16

. 9 Cleaning

Exterior Cleaning

Vinyl Clad (Black or White) Models:

•Clean surfaces with a mild detergent and warm water solution. Do not use solvent-based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft, clean towel to prevent water spotting.

•Clean any glass surfaces with a non-chlorine glass cleaner.

Stainless Models:

•Stainless door panels, handles and frames can discolor when exposed to chlorine gas, pool chemicals, saltwater or cleaners with bleach.

•Keep your stainless unit looking new by cleaning with a good quality all-in-one stainless steel cleaner polish monthly. For best results use Claire® Stainless Steel Polish and Cleaner, which can be purchased from U-Line Corporation (Part Number 173348). Comparable products are acceptable. Frequent cleaning will remove surface contamination that could lead to rust. Some installations may require cleaning weekly.

•Do not clean with steel wool pads.

•Do not use stainless steel cleaners polishes on any glass surfaces.

•Clean any glass surfaces with a non-chlorine glass cleaner.

•Do not use cleaners not specifically intended for stainless steel on stainless surfaces (this includes glass, tile and counter cleaners).

•If any surface discoloring or rusting appears, clean it quickly with Bon-Ami® or Barkeepers Friend Cleanser® and a nonabrasive cloth. Always clean towards the grain. Always finish with Claire Stainless Steel Polish and Cleaner or comparable product to prevent further problems.

•Using abrasive pads such as Scotchbrite™ will cause the graining in the stainless to become blurred.

•Rust not cleaned up promptly can penetrate the surface of the stainless steel and complete removal of the rust may not be possible.

Interior Cleaning

•Disconnect power to the unit.

•Clean the interior and all removed components using a mild nonabrasive detergent and warm water solution applied with a soft sponge or non-abrasive cloth.

•Rinse the interior using a soft sponge and clean water.

•Do not use any solvent-based or abrasive cleaners. These types of cleaners may transfer taste to the interior products and damage or discolor the interior.

Defrosting

Manual Defrost Models

Unit is a manual defrost model that will require occasional defrosting. When there is build-up of 1/4” or more, manually defrost the unit. Defrost every two months minimum.

•Ensure the door is closing and sealing properly.

•High ambient temperature and excessive humidity can also produce frost.

CAUTION

DO NOT use an ice pick or other sharp instrument to help speed up defrosting. These instruments can puncture the inner lining or damage the cooling unit. DO NOT use any type of heater to defrost. Using a heater to speed up defrosting can cause personal injury and damage to the inner lining.

1

To defrost:

1.Disconnect power to the unit.

2.For combo models remove all products from the interior.

3.Remove ice bucket and discard ice.

4.Place towel or other absorbent materialon bottom of ice bin. For combo models also place in bottom of unit.

5.Fill the ice bucket half full with warm, not hot water. This will help the unit defrost faster.

6.Place the ice bucket back into the unit on top of the towel or other absorbent material.

7.Prop the door in an open position (2 in. (5 cm) minimum).

8.After about 1 hour remove the ice bin and discard water.

9.Allow the frost to melt naturally.

10.After the frost melts completely clean the interior and all removed components. (See INTERIOR CLEANING)

IMPORTANT

DO NOT clean ice bucket using a dishwasher. The bucket is not dishwasher safe and will be damaged.

11. When the interior is dry, reconnect power and turn unit on.

NOTE: To safeguard against contaminates in ice, discard first three batches of ice after defrosting.

13

U-Line Combo® Models and Ice Makers Cleaning

Page 15 Page 17
Image 16
Page 15 Page 17
Contents USE and Care Guide Please Record Your Model Information Read and save this Use and Care GuideIntroduction Line Use and Care Guide Table of Contents General Precautions Safety Alert DefinitionsSafety Precautions Ice Makers Feature Combo Models FeatureCO1175 and BI2115 Model Feature BI2115 Model FeaturesAir Flow Initial StartupControl Dial Product OperationAdjusting AirTemperature Adjusting Ice HarvestChecking Product Temperature To check the actual product temperature in the unitIce Maker Operation Ice Maker AdjustmentIce Maker Maintenance Removing and Installing Interior ShelvesLeveling Removing and Installing Door Shelves Removing and Installing GrilleInstalling the grille Door Alignment and Adjustment Door ReversabilityReversing the door Standard DoorsInstall bottom hinge Prepare door for reinstallation For black or white doorsInstall top hinge, and door Prepare door for reinstallationSelf-Closing Doors 175 mmReinstall hinge to bottom opposite Reinstall hinge to top oppositeReinstall Hole Plugs Install DoorExterior Cleaning Interior CleaningCleaning DefrostingCondensor Cleaning Storage, Vacation and MovingProduct Disposal Interval Every Six MonthsBefore Calling for Service If Service is RequiredReplacement Parts Troubleshooting GuideLine Corporation Limited Warranty He Built-In Undercounter Leader Since
Related manuals
Manual 20 pages 20.91 Kb Manual 19 pages 26.88 Kb

SP18, CO1175 specifications

U-Line has been a pioneer in the field of undercounter refrigeration, and its SP18, BI98, and BI95 models stand out for their exceptional performance, innovative technologies, and versatile designs, making them highly sought after by both homeowners and professionals alike.

The U-Line SP18 model is crafted for those seeking a compact yet powerful solution to enhance their kitchen or entertainment area. This unit is designed to hold up to 42 cans, with a storage capability that can handle various beverages. One of the standout features is its digital temperature control that enables precise adjustments ranging from 34°F to 65°F, ensuring that your beverages are served at optimal temperatures. The glass door is an aesthetically pleasing element that also offers UV protection, preventing the degradation of your drinks due to light exposure.

Transitioning to the BI98 model, this unit is designed for built-in applications, allowing for seamless integration into cabinetry. The BI98 boasts an impressive capacity of 98 cans, making it ideal for larger gatherings or for households that stock up on beverages. One of its key technologies is the dual-zone cooling system, which allows users to independently control the temperatures in two separate sections, catering to different types of beverages at their ideal serving temperatures. This flexibility is especially beneficial for parties or when hosting multiple guests.

The BI95 is another remarkable addition to U-Line's lineup, designed specifically for those who prioritize versatility and efficiency. This model offers a slightly smaller capacity than the BI98, capable of holding around 95 cans. However, it compensates with advanced features like energy-efficient IntelliCold technology. This ensures that the compressor runs only when needed, maintaining consistent temperatures while minimizing energy consumption. The BI95 also features a sleek stainless-steel finish and a reversible door, enhancing its adaptability to various kitchen layouts and styles.

All three models come equipped with LED lighting that beautifully illuminates the interior, allowing for easy visibility and selection of beverages. The quiet operation of these models ensures that they can be placed in any living space without disruptive noise. U-Line's commitment to quality and functionality is evident across the SP18, BI98, and BI95, making these models staples for modern kitchens and entertainment spaces. Their combination of aesthetics, innovative technologies, and thoughtful design provides an unparalleled experience in beverage preservation and accessibility.
Top Page Image Contents