Using Your Car Kit
Note: Some phones require you to press the Bluetooth Button E twice. See the user’s guide for your phone for more information.
Receiving a Call
To answer an incoming call, do one of the following:
•Press and release (in less than three seconds) the Bluetooth Button E. or
Press your phone’s press the OK/Send/Yes key (depending on your phone), just as you would to answer a call in privacy mode.
or
• Use voice activation. See “Making a Call with the Car Kit’s Internal Voice Recognition” on page 13.
Ending a Call
To end a call:
•Press and release (in less than three seconds) the Bluetooth Button E. You can also end a call by pressing the END key on the phone.
Using Features While on a Call
Note: To use the functions described below, a Bluetooth link must be established between the car kit and your phone. Most phones automatically activate a Bluetooth connection when you place a call.
Rejecting an Incoming Call
While the phone is ringing, reject the call by pressing and holding the Bluetooth Button E for more than 3 seconds.
Note: Performance may vary on different phones. For example, for some phones (such as Ericsson’s T68), rejecting an incoming call can break the Bluetooth link.
Transferring a Call
From the car kit to your phone:
•During a call, press and hold the Bluetooth Button E for more than 3 seconds. (Most phones prompt you to accept the transfer before completing the transfer.)
From your phone to the car kit:
•During a call, press and release the Bluetooth Button E. (Some phones require you to press the Bluetooth Button E twice. See the user’s guide for your phone for more information.)
Muting and Unmuting a Call
To mute the microphone during a call, press the car kit’s mute button. The Mute Button will flash, and the other party will not be able to hear you.
To
14