Training Quick Reference
1Set phone keypad tones to normal tones. (Refer to phone user’s guide for information about defining keypad tones.)
If Bluetooth Button E does not flash, press it to establish a Bluetooth link.
2Press, hold Voice Recognition Button until it flashes.
3Train car kit by using commands described below.
4Exit Training Mode: Press, release Voice Recognition Button.
Record Key Word
H# 2 #
FSay a name (speak clearly)
GMotorola (for example)
FRepeat
GMotorola
FMotorola stored
Related Information
FRepeat (confirm first entry or when car kit cannot distinguish key word)
FAborting (if nothing said for 10 seconds) Note: Turn off vehicle to reduce noise while recording.
Record Name
H# 8 #
FSay a name (speak clearly)
GJohn Smith
FRepeat
GJohn Smith
F Press the number, star to end
Hnumber to store, then *
F John Smith Stored
Related Information
FRepeat (when car kit cannot distinguish key word)
FAborting (if nothing said for 10 seconds)
FMemory full (if more than 30 names stored or 30 s. recorded)
HC (clear last
HC (press and hold to erase phone number and cancel)
Note: Turn off vehicle to reduce noise while recording.
Delete/Browse
H# 3 #
F Say a name, press 9 to delete
GJohn Smith (name you want to delete)
F John Smith, press 9 to delete
G9 (John Smith name and phone number deleted)
H# (hear next name)
*(hear previous name)
Related Information
FAborting (if nothing said for 10 seconds) Note: Turn off vehicle to reduce noise while recording.
Key Word On/Off
H# 6 #
F On
H # 6 #
F Off
Related Information
Key to Symbols
HPress the following key(s) or enter the following information
FCar kit says ...
GYou say ...
17