Unigreen LASER-FUTURA- EXPO series AT STD/TOP - AT BASE manual Key to the symbols

Page 5

1

2

3

4

5

6

Key to the symbols

1- Read the Use and Maintenance manual

 

 

 

 

 

 

 

 

 

 

 

 

2- Stop the machine and read the manual before

 

 

 

 

 

 

every intervention

 

 

 

 

 

 

3- Don’t lubricate while running

 

 

 

 

 

 

4- Don’t drink

 

 

 

 

 

 

5- Don’t dispose of residue liquids in the

 

 

 

 

 

 

environment

 

 

 

 

 

 

6- No smoking

7

8

9

10

11

12

7- Danger, risk or injury, don’t get near the

 

 

 

 

 

 

machine until the moving machine members

 

 

 

 

 

 

have stopped

 

 

 

 

 

 

8- Danger of crushing, don’t get your hands near

 

 

 

 

 

 

the moving mechanical machine members

 

 

 

 

 

 

9- Danger, risk or injury caused by fluids under

 

 

 

 

 

 

pressure

 

 

 

 

 

 

10- Don’t climb on the machine during work or

13

14

15

16

17

18

transfers

 

 

 

 

 

 

11- Don’t climb on the tank

 

 

 

 

 

 

12- Don’t enter in the tank

 

 

 

 

 

 

13- Wearing earmuffs is obligatory

 

 

 

 

 

 

14- Wearing a face mask is obligatory

 

 

 

 

 

 

15- Wearing safety footwear is obligatory

 

 

 

 

 

 

16- Wearing protective gloves is obligatory

 

 

 

 

 

 

17- Wearing protective overalls is obligatory

 

 

 

 

 

 

18- Use a working pressure under that indicated

 

 

 

 

 

 

in red on the manometer.

19

20

21

 

22

23

19- Don’t get your hands near the moving cardan

 

shaft

20- Make sure power-takeoff of the tractor turns in the right direction and runs at the right speed. 21- Don’t remove the protecting device with fan moving.

22- Material shooting off the machine, stand at a safe distance.

23- Don’t stand between the machine and the tractor.

2SAFETY REGULATIONS AND RESIDUAL RISKS In relation to safety, the following terms will be used:

Dangerous zones: any zone inside and/or near the machine where the presence of a person exposed constitutes a risk for the safety and health of the same person.

Person exposed: any person who has their body or any part of their body in a dangerous zone.

Before starting the machine, the operator must check for any visible faults in the safety devices and the machine itself.

Never start the machine until you have told anyone in the range of action of the machine to move away and they have done so.

The protective devices must not be removed or disabled when the machine is running.

It is obligatory to keep all the plates with danger and safety signs in perfect conditions. If they get damaged or deteriorate, replace them in good time. Replace parts believed to be faulty with others indicated by UNIGREEN. NEVER try makeshift or hazardous solutions.

Don’t wear clothes, jewellery, accessories, or anything else that can get caught in the moving machine members.

Pay the greatest attention to all the warning and danger signs on the machine. Don’t use the machine for any other purpose other than that indicated in the manual.

The machine has been designed and built with the appropriate devices to guarantee the safety of the user.

In any case there are some residual risks associated with the improper use of the machine by the operator; for this purpose danger signs and symbols and prohibitions are applied near some parts of the machine (see previous pictograms).

FIG.1

da 1 a 18 (P16-P20)

11+12

21+22

923

11+12

da 1 a 18

9

INDICATIVE POSITION OF THE WARNING SIGNS ON THE MISTBLOWERS

NB: the position may vary on the basis of the characteristics of the model.

unigreen 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 09/2006 USE and Maintenance ManualSummary Hand Lances Maintenance Product Responsibility Unigreen spa is not responsible if GuaranteeComposition of the Manual Key to the symbols Intended USE Using Chemical ProductsProhibited USE RecommendationsWeather Conditions Characteristics and SpecificationsDriving on the Road Tables of Fittings AllowedStandards of Reference Noise Level of the MachineUSER’S Instructions Description of the Machine Hand Washing TanksTowed Atomisers Parking Preliminary ChecksTransporting and Moving the Machine Tractor Coupling Adjustable HubsDrawbar with Towing EYE or Fork Steering Drawbar Coupledto ElevatorSuction Filter Cardan ShaftPump Components of the Pressure Regulator Pressure RegulatorControl box for GCP Elettrico electrical regulators General InstructionsDelivery Filters only Equipped Models Filling the Tank Test with Clean WaterManual Premixing MixingPremixer on Cover Optional MAXCircuit Washer Andtank Washer Washing the AtomiserAxial Blower Group with Pulley Blower GroupAxial Blower Group with Multiplier Blower Group with Front SuctionClutch Axial RotorCannon Blower Group Manually Inclinabile HeadOIL Feed from Tractor for hydraulic systems Normal Volume Conical Nozzles Over 500L/HASpraying Description of Type of Jets Description of Type of NozzlesANTI-DRIFT Nozzles LOW Volume Conical Nozzles 150-500L/HACalibrating Axial FAN Atomisers Speed 6 Km. / hTreatments on Tall Plants Calibrating Cannon Atomisers Tables on pagesTreatments on Herbaceous Cultivations Hand LancesProgrammed Maintenance MaintenanceRoutine Maintenance Cleaning the NozzlesStorage in a Warehouse and Transportation Putting Back Into Service After Winter LayupDemolition and Disposal Materials for DemolitionCommonly used spare parts TR80-01 Arancio Tables for Calibrating Mistblowers Ø600-650 Calibrating TableTables for Calibrating Mistblowers Ø700-750 Tables for Calibrating Mistblowers Ø800 Tables for Calibrating Mistblowers Ø900 Tables for Calibrating Mistblowers Ø800 TGZ Tables for Calibrating Mistblowers Ø650 TGZTables for Calibrating Cannons Ø450 Calibrating Table for Cannons23 m Tables for Calibrating Cannons Ø400 440108 121 136 Pressure Tables of Delivery of Nozzles for AtomisersPressure BAR JET Tables of Delivery of Nozzles for Hand Lances50 h 300 h Table of Programmed Maintenance OperationPROBLEMS, Causes and Solutions TAB.14B Allowed Fittings Group TAB.15B Allowed FittingsTAB.16B Allowed Fittings Member of the group

LASER-FUTURA- EXPO series AT STD/TOP - AT BASE specifications

The Unigreen LASER-FUTURA-EXPO series, specifically the models AT STD/TOP and AT BASE, represents a groundbreaking advancement in the realm of agricultural technology. Designed for precision and efficiency, these laser-guided systems are engineered to meet the demands of modern farming practices. The LASER-FUTURA-EXPO series is synonymous with innovation and high performance, offering a range of features and technologies that enhance productivity.

One of the standout characteristics of the AT STD/TOP model is its advanced laser guidance system. This technology allows for unparalleled accuracy in land leveling and grading, ensuring that the soil is prepared perfectly for planting. The integration of top-grade lasers significantly reduces human error and increases operational efficiency. For farmers, this means that crops can be established in an optimized environment, leading to healthier yields.

The AT BASE variant provides a cost-effective solution while still delivering essential laser-fueled functionalities. This model maintains the fundamental technologies of the series but offers a streamlined approach to achieving precision farming. Both models feature durable construction designed to withstand the rigors of outdoor use while providing operators with a user-friendly experience.

A notable technology incorporated into the LASER-FUTURA-EXPO series is its real-time monitoring capabilities. This allows farmers to track their operations seamlessly, making adjustments on-the-fly based on the live data collected. This feature significantly enhances decision-making processes, enabling proactive management of equipment and resources.

The ergonomic design of both the AT STD/TOP and AT BASE models facilitates ease of use, with intuitive controls that allow operators to focus on their tasks without unnecessary distraction. Additionally, maintenance is simplified, ensuring that downtime is minimized and productivity maximized.

In summary, the Unigreen LASER-FUTURA-EXPO series AT STD/TOP and AT BASE models epitomize modern agricultural innovation. With advanced laser guidance, real-time monitoring, and user-friendly design, these systems empower farmers to optimize their operations while promoting sustainable practices. As agriculture continues to evolve, products like the LA-SER-FUTURA-EXPO are at the forefront, enabling a new era of efficiency and productivity in farming.
Top Page Image Contents