Unigreen LASER-FUTURA- EXPO series AT STD/TOP - AT BASE Pressure Regulator, General Instructions

Page 12

Don’t use the sprayer without having consulted the enclosed handbook.

way

12unigreen

Before removing the cover of the filter, make sure that the same is isolated from the tubing by unscrewing the relevant rear valve (FIG. N°8) or on the 3- way deviator (FIG. N° 10, page 14).

After washing the cartridge, reassemble the cover making sure you connect the same to the circuit again, using the valves described above in the opposite order.

WARNING!: Don’t disperse the washing residues in the environment!!

4.8PRESSURE REGULATOR

To use the pressure regulator, follow the instructions in the enclosed handbook scrupulously. The pressure regulator controls all of the most important spraying functions, the thorough knowledge of its functions makes work easier and more precise.

The working pressure and the maximum pressure of the sprayer are determined by the pressure regulator which also protects the circuit from overpressure in any work conditions. (In serious but very rare cases, if the connecting pipes get blocked the pressure relief valve lets the pressure off)

In some setups there may be a pump that can reach a pressure of 50 bar controlled by a regulator designed for 20 bar. In this case the maximum pressure that can be reached is 20 bar.

The regulators can be manual, mounted on the sprayer or at a distance to make the controls easier to use; or electrical with a control panel in the cabin. There are also regulator versions with mechanical remote controls with a cable. If the tractor has a waterproof cabin the use of electrical controls is obligatory.

4.8.1 COMPONENTS OF THE PRESSURE REGULATOR

Below you will find the indications for the main models fitted on Unigreen products.

A main ON-OFF command: “open” lets the fluid flow into the circuit in use; “closed” empties the tank.

B maximum pressure valve: adjusted by hand with the relevant knob (drains the excess liquid when the set pressure is reached).

C jets section tap: opens the corresponding jet boom or drains to the compensation regulator (G).

D auxiliary tap: can be used for various accessories (it is always manual). E volumetric pressure valve (proportional):

(when present) it regulates the spraying pressure. The valve automatically compensates variations in speed (within the scope of the same gear ratio), keeping the quantity of liquid supplied per surface unit (litres/hectare) unchanged.

Fself-cleaning filter: filters the delivery liquid.

G compensation regulators: suitably regulated, these make it possible to keep the pressure constant when one or more sections of jets is closed, they don’t influence treatments with the boom fully open.

H manometer: indicates the working pressure.

Connections:

R1 supply union

R2 drain union

R3 volumetric drain union

R4 jets section delivery union

R5 auxiliary delivery union

Control box for GCP ELETTRICO electrical regulators

I1 main control valve switch

I2 volumetric pressure valve switch (proportional)

I3 jets section valves switches

4.8.2 GENERAL INSTRUCTIONS

When using the pressure regulator, scrupulously observe the instructions in the enclosed handbook, below you will find generic indications for the major models fitted by Unigreen.

All the regulation and adjustment tests must be carried out with clean water.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents USE and Maintenance Manual 09/2006Summary Hand Lances Maintenance Guarantee Composition of the ManualProduct Responsibility Unigreen spa is not responsible if Key to the symbols Using Chemical Products Intended USEProhibited USE RecommendationsCharacteristics and Specifications Weather ConditionsDriving on the Road Tables of Fittings AllowedNoise Level of the Machine Standards of ReferenceUSER’S Instructions Description of the Machine Hand Washing TanksPreliminary Checks Transporting and Moving the MachineTowed Atomisers Parking Adjustable Hubs Tractor CouplingDrawbar with Towing EYE or Fork Steering Drawbar Coupledto ElevatorCardan Shaft PumpSuction Filter Pressure Regulator Components of the Pressure RegulatorControl box for GCP Elettrico electrical regulators General InstructionsDelivery Filters only Equipped Models Test with Clean Water Filling the TankMixing Manual PremixingPremixer on Cover Optional MAXWashing the Atomiser Circuit Washer Andtank WasherBlower Group Axial Blower Group with PulleyAxial Blower Group with Multiplier Blower Group with Front SuctionAxial Rotor ClutchCannon Blower Group Manually Inclinabile HeadNormal Volume Conical Nozzles Over 500L/HA OIL Feed from Tractor for hydraulic systemsSpraying Description of Type of Jets Description of Type of NozzlesLOW Volume Conical Nozzles 150-500L/HA ANTI-DRIFT NozzlesCalibrating Axial FAN Atomisers Speed 6 Km. / hCalibrating Cannon Atomisers Tables on pages Treatments on Tall PlantsTreatments on Herbaceous Cultivations Hand LancesMaintenance Programmed MaintenanceRoutine Maintenance Cleaning the NozzlesPutting Back Into Service After Winter Layup Storage in a Warehouse and TransportationDemolition and Disposal Materials for DemolitionCommonly used spare parts TR80-01 Arancio Calibrating Table Tables for Calibrating Mistblowers Ø600-650Tables for Calibrating Mistblowers Ø700-750 Tables for Calibrating Mistblowers Ø800 Tables for Calibrating Mistblowers Ø900 Tables for Calibrating Mistblowers Ø650 TGZ Tables for Calibrating Mistblowers Ø800 TGZCalibrating Table for Cannons Tables for Calibrating Cannons Ø450Tables for Calibrating Cannons Ø400 440 23 m108 121 136 Tables of Delivery of Nozzles for Atomisers PressureTables of Delivery of Nozzles for Hand Lances Pressure BAR JETTable of Programmed Maintenance Operation PROBLEMS, Causes and Solutions50 h 300 h TAB.14B Allowed Fittings TAB.15B Allowed Fittings GroupTAB.16B Allowed Fittings Member of the group

LASER-FUTURA- EXPO series AT STD/TOP - AT BASE specifications

The Unigreen LASER-FUTURA-EXPO series, specifically the models AT STD/TOP and AT BASE, represents a groundbreaking advancement in the realm of agricultural technology. Designed for precision and efficiency, these laser-guided systems are engineered to meet the demands of modern farming practices. The LASER-FUTURA-EXPO series is synonymous with innovation and high performance, offering a range of features and technologies that enhance productivity.

One of the standout characteristics of the AT STD/TOP model is its advanced laser guidance system. This technology allows for unparalleled accuracy in land leveling and grading, ensuring that the soil is prepared perfectly for planting. The integration of top-grade lasers significantly reduces human error and increases operational efficiency. For farmers, this means that crops can be established in an optimized environment, leading to healthier yields.

The AT BASE variant provides a cost-effective solution while still delivering essential laser-fueled functionalities. This model maintains the fundamental technologies of the series but offers a streamlined approach to achieving precision farming. Both models feature durable construction designed to withstand the rigors of outdoor use while providing operators with a user-friendly experience.

A notable technology incorporated into the LASER-FUTURA-EXPO series is its real-time monitoring capabilities. This allows farmers to track their operations seamlessly, making adjustments on-the-fly based on the live data collected. This feature significantly enhances decision-making processes, enabling proactive management of equipment and resources.

The ergonomic design of both the AT STD/TOP and AT BASE models facilitates ease of use, with intuitive controls that allow operators to focus on their tasks without unnecessary distraction. Additionally, maintenance is simplified, ensuring that downtime is minimized and productivity maximized.

In summary, the Unigreen LASER-FUTURA-EXPO series AT STD/TOP and AT BASE models epitomize modern agricultural innovation. With advanced laser guidance, real-time monitoring, and user-friendly design, these systems empower farmers to optimize their operations while promoting sustainable practices. As agriculture continues to evolve, products like the LA-SER-FUTURA-EXPO are at the forefront, enabling a new era of efficiency and productivity in farming.
Top Page Image Contents