Unigreen LASER-FUTURA- EXPO series AT STD/TOP - AT BASE manual Intended USE, Prohibited USE

Page 6

2.1INTENDED USE

The sprayer in this series is built for agricultural use. The materials used are resistant to normal chemical products used in agricultural spraying (or herbicides) at the time of construction.

Any other use is not allowed and the manufacturer is not responsible for any damage caused by aggressive, dense or sticky chemicals.

THE USE OF THE MACHINE BY PERSONS UNDER 18 YEARS OF AGE IS STRICTLY FORBIDDEN

The use of liquid fertilizers in suspension is not allowed, while the use of the same in a solution is possible if requested when the machine is ordered from Unigreen and in any case changing some of the parts described in the handbooks of the regulator, such as the manometer (stainless steel), the nozzles (large diameter ceramic) and eliminating the fine mesh filters to prevent blockages.

2.2PROHIBITED USE

Using the machine with the following products is strictly forbidden:

=Paints of any kind and type

=Solvents or thinners for paints of any kind and type

=Combustibles or lubricants of any kind and type

=LPG or gas of any kind and type

=Flammable liquids of any kind and type

=Liquid foodstuffs, whether for animals or humans

=Liquids containing granules or consistent solids

=Mixtures of various incompatible chemical products

=Liquid fertilizer or manure in suspension with lumps and/or that is particularly dense

=Liquids with a temperature of over 40°C

=Any products that aren’t suitable for the specific use of the machine.

2.3USING CHEMICAL PRODUCTS

All pesticides or herbicides can be dangerous to humans and the environment if used erroneously or inadvertently.

Therefore we recommend that only suitably trained persons should use these products (license) and in any case only after having carefully read the instructions on the container.

2.3.1REGULATIONS FOR THE USE OF CHEMICAL PRODUCTS Some recommendations for avoiding damage and accidents:

=Keep the machine in a suitable, protected place with no access for children or strangers

=Handle the products with care, wearing rubber acid-proof gloves, goggles- face masks or filtering helmets, overalls made of water-repellent fabrics or TIVEK and boots made of rubber or similar materials.

=If chemical products or mixtures of product come into contact with the eyes or are swallowed consult a doctor immediately, taking the label of the product with you.

=Wash all clothes that come into contact with the chemical, whether diluted or undiluted, thoroughly before using them again.

=Don’t smoke, drink or eat when preparing or spraying the mix or near or in the fields treated.

=DON’T ENTER THE TANK: the residues of a chemical product can cause poisoning and suffocation.

=When spraying, respect safe distances from residential areas, water courses, roads, sports centres and public parks or paths.

=Thoroughly wash the containers of plant protection products using the relevant accessories, rinsing several times with clean water. The liquids used for washing can be used for treatment.

=Collect the washed containers and send them to the relevant collection centres. Never dispose of them in the environment and don’t use them again for any other purpose. It is good practice to knock a hole in the bottom of the tins so they can’t be used again.

=When you have finished spraying, wash the sprayer thoroughly, diluting the residues with a quantity of water at least 10 times that of the residues, spraying the resulting mix over the treated field.

 

2.4 RECOMMENDATIONS

 

a) Refer to the present handbook for the use and maintenance of the frame,

6 unigreen

tank, auto-levelling systems, elevators, mechanical and hydraulic herbicide

booms, spray booms and hose reels.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents USE and Maintenance Manual 09/2006Summary Hand Lances Maintenance Guarantee Composition of the ManualProduct Responsibility Unigreen spa is not responsible if Key to the symbols Prohibited USE Using Chemical ProductsIntended USE RecommendationsDriving on the Road Characteristics and SpecificationsWeather Conditions Tables of Fittings AllowedUSER’S Instructions Description of the Machine Noise Level of the MachineStandards of Reference Hand Washing TanksPreliminary Checks Transporting and Moving the MachineTowed Atomisers Parking Drawbar with Towing EYE or Fork Adjustable HubsTractor Coupling Steering Drawbar Coupledto ElevatorCardan Shaft PumpSuction Filter Control box for GCP Elettrico electrical regulators Pressure RegulatorComponents of the Pressure Regulator General InstructionsDelivery Filters only Equipped Models Test with Clean Water Filling the TankPremixer on Cover Optional MixingManual Premixing MAXWashing the Atomiser Circuit Washer Andtank WasherAxial Blower Group with Multiplier Blower GroupAxial Blower Group with Pulley Blower Group with Front SuctionCannon Blower Group Axial RotorClutch Manually Inclinabile HeadSpraying Description of Type of Jets Normal Volume Conical Nozzles Over 500L/HAOIL Feed from Tractor for hydraulic systems Description of Type of NozzlesCalibrating Axial FAN Atomisers LOW Volume Conical Nozzles 150-500L/HAANTI-DRIFT Nozzles Speed 6 Km. / hTreatments on Herbaceous Cultivations Calibrating Cannon Atomisers Tables on pagesTreatments on Tall Plants Hand LancesRoutine Maintenance MaintenanceProgrammed Maintenance Cleaning the NozzlesDemolition and Disposal Putting Back Into Service After Winter LayupStorage in a Warehouse and Transportation Materials for DemolitionCommonly used spare parts TR80-01 Arancio Calibrating Table Tables for Calibrating Mistblowers Ø600-650Tables for Calibrating Mistblowers Ø700-750 Tables for Calibrating Mistblowers Ø800 Tables for Calibrating Mistblowers Ø900 Tables for Calibrating Mistblowers Ø650 TGZ Tables for Calibrating Mistblowers Ø800 TGZCalibrating Table for Cannons Tables for Calibrating Cannons Ø450Tables for Calibrating Cannons Ø400 440 23 m108 121 136 Tables of Delivery of Nozzles for Atomisers PressureTables of Delivery of Nozzles for Hand Lances Pressure BAR JETTable of Programmed Maintenance Operation PROBLEMS, Causes and Solutions50 h 300 h TAB.14B Allowed Fittings TAB.15B Allowed Fittings GroupTAB.16B Allowed Fittings Member of the group

LASER-FUTURA- EXPO series AT STD/TOP - AT BASE specifications

The Unigreen LASER-FUTURA-EXPO series, specifically the models AT STD/TOP and AT BASE, represents a groundbreaking advancement in the realm of agricultural technology. Designed for precision and efficiency, these laser-guided systems are engineered to meet the demands of modern farming practices. The LASER-FUTURA-EXPO series is synonymous with innovation and high performance, offering a range of features and technologies that enhance productivity.

One of the standout characteristics of the AT STD/TOP model is its advanced laser guidance system. This technology allows for unparalleled accuracy in land leveling and grading, ensuring that the soil is prepared perfectly for planting. The integration of top-grade lasers significantly reduces human error and increases operational efficiency. For farmers, this means that crops can be established in an optimized environment, leading to healthier yields.

The AT BASE variant provides a cost-effective solution while still delivering essential laser-fueled functionalities. This model maintains the fundamental technologies of the series but offers a streamlined approach to achieving precision farming. Both models feature durable construction designed to withstand the rigors of outdoor use while providing operators with a user-friendly experience.

A notable technology incorporated into the LASER-FUTURA-EXPO series is its real-time monitoring capabilities. This allows farmers to track their operations seamlessly, making adjustments on-the-fly based on the live data collected. This feature significantly enhances decision-making processes, enabling proactive management of equipment and resources.

The ergonomic design of both the AT STD/TOP and AT BASE models facilitates ease of use, with intuitive controls that allow operators to focus on their tasks without unnecessary distraction. Additionally, maintenance is simplified, ensuring that downtime is minimized and productivity maximized.

In summary, the Unigreen LASER-FUTURA-EXPO series AT STD/TOP and AT BASE models epitomize modern agricultural innovation. With advanced laser guidance, real-time monitoring, and user-friendly design, these systems empower farmers to optimize their operations while promoting sustainable practices. As agriculture continues to evolve, products like the LA-SER-FUTURA-EXPO are at the forefront, enabling a new era of efficiency and productivity in farming.
Top Page Image Contents