Test RUN, Explanation to the User | Troy-Bilt MXZ-4A36NA guide

4-3. TEST RUN

•Be sure to perform the test run for each unit. Make sure each indoor unit operates properly following the installation manual attached to the unit.

•If you perform the test run for all indoor units at once, you cannot de- tect any erroneous connection, if any, of the refrigerant pipes and the indoor/outdoor unit connecting wires.

About the restart protective mechanism

Once the compressor stops, the restart preventive device operates so the compressor will not operate for 3 minutes to protect the air conditioner.

Wiring/piping correction function

This unit has a wiring/piping correction function which corrects wiring and piping combination. When there is possibility of incorrect wiring and piping combination, and confirming the combination is difficult, use this function to detect and correct the combination by following the proce- dures below.

Make sure that the following is done.

•Power is supplied to the unit.

•Stop valves are open.

Note:

During detection, the operation of the indoor unit is controlled by the out- door unit. During detection, the indoor unit automatically stops operation. This is not a malfunction.

Procedure

Press the piping/wiring correction switch (SW871) 1 minute or more after turning on the power supply.

•Correction completes in 10 to 15 minutes. When the correction is com- pleted, its result is shown by LED indication. Details are described in the following table.

•To cancel this function during its operation, press the piping/wiring cor- rection switch (SW871) again.

•When the correction completed without error, do not press the piping/ wiring correction switch (SW871) again.

When the result was “cannot be corrected”, press the piping/wiring cor- rection switch (SW871) again to cancel this function. Then, confirm the wiring and piping combination in a conventional manner by operating the indoor units one by one.

•The operation is done while the power is supplied. Make sure not to contact parts other than the switch, including the P.C. board. This may cause electric shock or burn by hot parts and live parts around the switch. Contacting the live parts may cause P.C. board damage.

•To prevent electronic control P.C. board damage, make sure to per- form static elimination before operating this function.

•This function does not operate when the outside temperature is 0°C

(32°F) or below.

4-4. EXPLANATION TO THE USER

•Using the OPERATING INSTRUCTIONS, explain to the user how to use the air conditioner (how to use the remote controller, how to re- move the air filters, how to remove or put the remote controller in the remote controller holder, how to clean, precautions for operation, etc.)

•Recommend the user to read the OPERATING INSTRUCTIONS care- fully.

LED indication during detection:

LED

1 (Red)	2 (Yellow)	3 (Green)
Lighted	Lighted	Blinking

Result of piping/wiring correction function

	LED		Result
1 (Red)	2 (Yellow)	3 (Green)	Result
1 (Red)	2 (Yellow)	3 (Green)
Lighted	Not lighted	Lighted	Completed (Corrected successfully)
Blinking	Blinking	Blinking	Cannot be corrected
			Refer to “SAFETY PRECAUTIONS
Other indications			WHEN LED FLASHES” located
			behind the service panel.

MXZ-4A36NA, MXZ-3A30NA specifications

Troy-Bilt has long been a trusted name in outdoor power equipment, and their latest offerings, the MXZ-4A36NA and MXZ-3A30NA, exemplify the brand's commitment to quality and innovation in the field of lawn maintenance. Designed for homeowners and landscapers alike, these lawn mowers provide exceptional performance and versatility for tackling various mowing tasks.

The MXZ-4A36NA model boasts a powerful 24 HP engine, allowing it to effortlessly cut through thick grass and navigate uneven terrain. Its standout feature is the 36-inch cutting deck, which is not only robust but also designed to provide a clean and precise cut. An adjustable cutting height ensures that users can achieve their desired lawn finish, whether it's a smooth, manicured look or a slightly longer finish for a healthier lawn.

Similarly, the MXZ-3A30NA model provides efficiency with its 21 HP engine and 30-inch cutting deck. This smaller size makes it ideal for those with smaller lawns or more intricate landscaping. The compact design doesn’t skimp on power or performance; it ensures maneuverability in tight spaces, making it suitable for various properties.

Both models feature advanced technology that enhances the mowing experience. Troy-Bilt's "TractorTuff" technology allows for an easy start-up and smooth operation, while the 'Smart Switch' ignition system adds convenience with simple push-button starts. These features not only make operating the mowers easier but also increase overall reliability.

In terms of user comfort, the MXZ series includes features such as an ergonomic seat and easy-to-reach controls, making extended mowing sessions more enjoyable. The mowers are designed with durability in mind as well, featuring heavy-duty construction and high-quality materials to withstand the rigors of regular use.

Another noteworthy characteristic is the maintenance-friendly design. Both models come with quick-access panels, making it easier for users to perform regular maintenance tasks like oil changes and blade replacements without hassle.

Overall, the Troy-Bilt MXZ-4A36NA and MXZ-3A30NA represent an impressive combination of power, efficiency, and user-friendly features. Whether for professional landscaping or residential use, these mowers are equipped to handle a wide range of mowing challenges effectively and with ease, making them worthy additions to any lawn care arsenal.