Rose electronic CLK-4U2FS-10KM, CLK-4U2FM-500M manual Features, Package contents

Features



















Supports USB 1.1 (low and full speed) and USB 2.0 (high-speed)

Supports USB 2.0 and USB 1.1 host computer systems (EHCI / USB 2.0 – OHCI/UHCI USB 1.1)

Extends USB devices up to 1640 feet (500m-Mulitmode model) or

6miles (10 Km-Singlemode model). Four USB port on the receiver unit

Standard USB hubs can be used to increase the number of connected USB devices (up to 14 devices, including 3 USB hubs.

Up to 500 ma of power is available at each USB port for powering high- power USB devices

Transmitter and receiver have an optional earth ground connection point Plug-and-Play installation , no configuration or set-up needed Operating system independent, supports all major operating systems

Package contents

The package contents consist of the following:

The CrystalLink USB 2.0 transmitter and receiver units

Power adapter for the remote unit. (Auto-switching transformer)

Installation and operations manual CD.

Fiber and USB cables are usually ordered separately. If the package contents are not correct, contact Rose Electronics or your reseller, so the problem can be quickly resolved.

Rose Electronics web site

Visit out web site at www.rose.com for additional information on the CrystalLink USB 2.0 Fiber extenders and other products that are designed for data center applications, classroom environments and other applications.

About this manual

This manual covers the installation and operation of the CrystalLink USB 2.0 Singlemode and Multimode Fiber extender.

2

Installation and Operations Manual