Rose electronic CLK-4U2FS-10KM, CLK-4U2FM-500M manual Safety, Operating Instructions

Page 10

SAFETY

Operating Instructions

Operating your CrystalLink USB 2.0 Fiber extender is no different than having your USB peripherals directly connected to your computer’s USB port.

Any compatible USB 1.1 or 2.0 device can be totally controlled and operated normally with no special configuration or commands. USB printers, digital cameras, scanners, or any compatible USB 1.1 or 2.0 device will function properly. If more than 1 USB device needs to be remotely accessed, you can add a standard USB hub to increase the number of USB devices.

When using a USB hub, keep in mind that each USB port on the receiver can supply up to 500ma of current. Connecting a 4-port USB hub to the receiver port receives a max current of 500ma to the USB hub or 125ma per hub port.

UP to 14 USB devices, including additional USB hubs can be connected to the receiver unit. Powered USB hubs may be need if several high powered USB devices are connected.

6

Installation and Operations Manual

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Installation Operations Manual Limited Warranty FCC/IC STATEMENTS, EU Declaration of Conformity Table of Contents Disclaimer System introductionPackage contents FeaturesRose Electronics web site About this manual Connectors Indicator LEDsCrystalLink USB 2.0 Fiber model Receiver Troubleshooting Safety Operating InstructionsLink LEDs on the transmitter and receiver are both off Troubleshooting GuideAll LEDs on the transmitter or receiver are off Host LED on the transmitter is offSafety Grounding Safety and EMC Regulatory StatementsServicing Service Service InformationAppendix B. Part Numbers and Cables Appendix A. General SpecificationsAppendices Use only the AC adapter providedStancliff Road Houston, Texas Phone 281
Top Page Image Contents