ritetemp 401-014 manual Remove old unit, Mount the 8022C

Page 3

2 Remove old unit

Switch electricity to the furnace and air conditioner OFF; then proceed with the following steps.

Remove cover from old thermostat. Most are snap-on types and simply pull off. Some have locking screws on the side or front. These must be loosened. Note the letters printed near the terminals. Attach labels (enclosed) to each wire for identification.

Read instructions carefully before removing any wiring from existing thermostat. Wires must be labeled

Caution before they are removed. THERE IS NO STANDARD COLOR CODE. When removing wires from their terminals, ignore the color of the wires since these may not comply with the standard.

Label the wires one at a time. You must have all the wires labeled

before you proceed. With all wires labeled, remove them from the old unit.

Make sure the wires do not fall back inside the wall. Wind them around a

pencil to keep them from falling.

 

 

 

Loosen all screws on the old thermostat and

 

 

 

remove it from the wall.

 

 

 

Fill wall opening with non-combustible insulation

 

 

W

to prevent drafts.

 

G

R

 

PG 3

3 Mount the 8022C

C RC

O B

RH W

Y G

 

 

 

Separate front from back of unit. Press up on the catch on bottom of thermostat and swing the body away from the base, lift up to remove the body from

the base.

Hold the base against the wall, with the wires coming through the opening below the terminal block.

Position the base for best appearance. If you chose to use Wall Plate, put it in position before screwing base to wall.

Attach the base to the wall with the two screws provided.

If you are mounting the base to sheet rock or if you are using the old mounting holes, use the plastic anchors provided. Drill a 3/16- in.(4.8mm) hole for the insert at each screw location, then mount the base.

SET TEMP

P2

 

PM

FAN

OFF

AUTO

COOL

HEAT

the optional

Terminal

Block

A

ON

 

Wall

Thermostat

PG 4

Base

Plate

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Install guide 8022C Tools Location U T I O NMount the 8022C Remove old unitOptional Wire Connections Before you Connect WiresCheck Unit Install BatteriesTo check Heat mode To check Cool modePower Options 8022C can run on the C wire if available8022C can run on batteries only AA Alkaline Wire Wire Heating GAS Millivolt or 24vacPG 13 Note Wires marked with the dotted line are optional Should be changed in your blower 8022C Features

401-014 specifications

The Ritetemp 401-014 thermostat is designed for homeowners seeking an efficient and user-friendly temperature control solution. This programmable thermostat offers a robust range of features tailored to enhance home comfort while promoting energy savings.

At the core of the Ritetemp 401-014 is its programmable functionality. Users can set schedules that align with their daily routines, allowing the thermostat to automatically adjust heating and cooling based on predetermined times. This not only ensures that the home remains comfortable during waking hours but also conserves energy when occupants are away. With a 7-day programming capability, it allows flexibility in scheduling, accommodating varying needs throughout the week.

One of the standout technologies in the Ritetemp 401-014 is its easy-to-read LCD display. The large, backlit screen provides clear visibility of the current temperature settings and time, making it easy to monitor and adjust even in low light conditions. The interface is designed for user-friendliness, with intuitive buttons that simplify programming and adjustments.

The thermostat is compatible with various HVAC systems, including gas, oil, and electric heating systems, as well as central air conditioning units. This versatility makes it an excellent choice for a wide range of home heating and cooling setups. Additionally, the Ritetemp 401-014 features a built-in compressor protection delay, which helps to safeguard the HVAC system from potential damage caused by rapid cycling.

Energy efficiency is a critical characteristic of the Ritetemp 401-014. By utilizing programmable schedules, it allows homeowners to minimize energy expenditure while maintaining comfort levels. The device also features a battery backup system, ensuring that the settings are preserved even during power outages.

Another significant characteristic of the Ritetemp 401-014 is its ease of installation. The thermostat typically fits standard wall plates, making it a straightforward upgrade from an older unit. For tech-savvy homeowners, the thermostat is also compatible with smart home systems, providing additional control through mobile apps or voice command features.

Overall, the Ritetemp 401-014 thermostat combines simplicity, efficiency, and advanced technology, making it a reliable choice for homeowners aiming to enhance their comfort while managing energy usage effectively. Its user-friendly design, robust programming features, and compatibility with various HVAC systems make it a standout option in the realm of programmable thermostats.
Top Page Image Contents