U T I O N, Tools Location | ritetemp 401-014 specification

Install guide 8022C

Caution

Tools

1 Location

To avoid electrical shock and to prevent damage to the furnace, air conditioner, and thermostat, disconnect the power supply before beginning work.

This can be done at the circuit breaker, or at the appliance.

You will need #1 Phillips screwdriver (small) and Drill with 3/16-in. (4.8mm) bit for this installation.

	On replacement installations, mount the new thermostat in place of the
	old one if possible.
	On new Installations, follow the guidelines listed below.
	Locate the thermostat on an inside wall, about 5 ft. (1.5m) above the
	floor, and in a room that is used often.
	Do not install it where there are unusual heating conditions, such as: in
	direct sunlight; near a lamp, radio, television, radiator register, or
PG 1	fireplace; near hot water pipes in a wall; near a stove on the other side
PG 1	of a wall.
	Do not locate in unusual cooling conditions, such as: on a wall separating
	an unheated room; or in a draft from a stairwell, door, or window.
	Do not locate in a damp area. This can lead to corrosion that will shorten
	thermostat life.
	Do not locate where air circulation is poor, such as: in a corner or an
	alcove; or behind an open door.
	Do not install the unit until all construction work and painting has been
	completed.
	This thermostat does not require leveling.

Good

5ft.

(1.5m)

C A U T I O N

Your thermostat is a precise instrument. Please handle it with care.

Turn off electricity to the appliance before installing or servicing thermostat or any part of the system. Do not turn electricity back on until work is completed.

Do not short (jumper) across electric terminals at control on furnace or air conditioner to test the system.

This will damage the thermostat and void your

warranty.

All wiring must conform to local codes and ordinances. This thermostat is designed for use with 24 volt AC and millivolt systems. The thermostat should be limited to a

PG 2

401-014 specifications

The Ritetemp 401-014 thermostat is designed for homeowners seeking an efficient and user-friendly temperature control solution. This programmable thermostat offers a robust range of features tailored to enhance home comfort while promoting energy savings.

At the core of the Ritetemp 401-014 is its programmable functionality. Users can set schedules that align with their daily routines, allowing the thermostat to automatically adjust heating and cooling based on predetermined times. This not only ensures that the home remains comfortable during waking hours but also conserves energy when occupants are away. With a 7-day programming capability, it allows flexibility in scheduling, accommodating varying needs throughout the week.

One of the standout technologies in the Ritetemp 401-014 is its easy-to-read LCD display. The large, backlit screen provides clear visibility of the current temperature settings and time, making it easy to monitor and adjust even in low light conditions. The interface is designed for user-friendliness, with intuitive buttons that simplify programming and adjustments.

The thermostat is compatible with various HVAC systems, including gas, oil, and electric heating systems, as well as central air conditioning units. This versatility makes it an excellent choice for a wide range of home heating and cooling setups. Additionally, the Ritetemp 401-014 features a built-in compressor protection delay, which helps to safeguard the HVAC system from potential damage caused by rapid cycling.

Energy efficiency is a critical characteristic of the Ritetemp 401-014. By utilizing programmable schedules, it allows homeowners to minimize energy expenditure while maintaining comfort levels. The device also features a battery backup system, ensuring that the settings are preserved even during power outages.

Another significant characteristic of the Ritetemp 401-014 is its ease of installation. The thermostat typically fits standard wall plates, making it a straightforward upgrade from an older unit. For tech-savvy homeowners, the thermostat is also compatible with smart home systems, providing additional control through mobile apps or voice command features.

Overall, the Ritetemp 401-014 thermostat combines simplicity, efficiency, and advanced technology, making it a reliable choice for homeowners aiming to enhance their comfort while managing energy usage effectively. Its user-friendly design, robust programming features, and compatibility with various HVAC systems make it a standout option in the realm of programmable thermostats.