Troubleshooting
&Repair
igure 30. Remove Left Cover Panel Fasteners | Figure 31. Remove Left Cover |
,
Figure 32. Remove Rear Panel Fasteners | Figure 33. Remove Rear Panel |
|
8.Loosen the discharge tube hex nuts on the right side of the discharge tube, providing approximately i/8” clearance between the hex nut and the tube (Figure 34).
9.Using a l/2” socket wrench and i/2” box wrench, remove the hex head cap screw and hex nut secur- ing the discharge tube to the top brace (Figure 35).
10.Loosen the discharge tube hex nuts on the left side of the discharge tube, providing approximately l/8” clearance between the hex nut and the tube (Figure 36).
12.Slide the discharge tube away from the mounting studs on the shredder housing, and remove the tube through the opening in the back of the frame (Figure 37).
Figure 34. Loosen Discharge Tube Hex Nuts
2 9