SMC Networks SMC8126PL2-F manual Led

1 Introduction

		Table 1-1 Port Status LEDs
Label	Color		Description
Port 1-24	On/Flashing Amber		Port has a valid link at 10 or 100 Mbps. Flashing indicates activity.
(Link/Activity/
	On/Flashing Green		Port has a valid link at 1000 Mbps. Flashing indicates activity.
Speed Mode)
	Off		There is no valid link on the port.
Port 1-24	On Amber		A PoE device is connected.
(PoE Mode)
	Off		No PoE device connected.
Port 21/22/23/	On Green		SFP transceiver plugged in.
24
	Off		No SFP transceiver plugged in.
Port 25/26	On/Flashing Amber		Port has a valid link at 10 or 100 Mbps. Flashing indicates activity.
	On/Flashing Green		Port has a valid link at 1000 Mbps. Flashing indicates activity.
	Off		There is no valid link on the port.

			System LEDs
			Figure 1-4 System LEDs
		Table 1-2 System Status LEDs
LED	Condition		Status
Power	On Green		Internal power is operating normally.
	On Amber		Internal Power supply fault.
	Flashing Amber		RPU failure.
	Off		Power off or failure.
Diag	Flashing Amber		System diagnostic fail.
	On Green		System diagnostic test OK.
	On Amber		System diagnostic in progress.
	Alternate Amber-		Blink amber & green while booting.
	Green
PoE Status	On Green		Port LEDs display each port’s PoE Status
	Flashing Green		The switch has reached or exceeded 95% of its power budget.
	Amber		Indicates a thermal shutdown for the whole system.
	Flashing Amber		Indicates a high temperature warning.

1-4