SMC Networks SMC8126PL2-F manual Installing an Optional SFP Transceiver

Page 37

Installing an Optional SFP Transceiver 3

3.If installing a single switch only, go to "Connecting to a Power Source" at the end of this chapter.

4.If installing multiple switches, attach four adhesive feet to each one. Place each device squarely on top of the one below, in any order.

Installing an Optional SFP Transceiver

Figure 3-5 Inserting an SFP Transceiver into a Slot

The switch supports 1000BASE-SX and 1000BASE-LX, and 1000BASE-ZX SFP-compatible transceivers. To install an SFP transceiver, do the following:

1.Consider network and cabling requirements to select an appropriate SFP transceiver type.

2.Insert the transceiver with the optical connector facing outward and the slot connector facing down. Note that SFP transceivers are keyed so they can only be installed in one orientation.

3.Slide the SFP transceiver into the slot until it clicks into place.

Note: SFP transceivers are hot-swappable. The switch does not need to be powered off before installing or removing a transceiver. However, always first disconnect the network cable before removing a transceiver.

Note: SFP transceivers are not provided in the switch package.

3-5

Image 37

Contents Installation Guide TigerSwitch 10/100/1000 Installation Guide Page Warranty and Product Registration Compliances and Safety Warnings CE Mark Declaration of Conformance for EMI and Safety EEC Safety Compliance France and Peru only France et Pérou uniquement Francia y Perú únicamente Vii Advertencias y mensajes de precaución Purpose Page Contents Appendix a Troubleshooting Contents Tables Figures Xvi Front Panel Power-over-Ethernet Capability Switch ArchitectureNetwork Management Options 10/100/1000BASE-T Ports Description of HardwareSFP Slots Port and System Status LEDsLED Optional Redundant Power Unit Mode PoE/Link ButtonPower Supply Socket Connectivity Features and BenefitsExpandability PerformanceNetwork Planning Introduction to SwitchingCollapsed Backbone Application ExamplesNetwork Aggregation Plan Network Aggregation PlanRemote Connections with Fiber Cable Remote Connections with Fiber CableMaking Vlan Connections Making Vlan ConnectionsApplication Notes Selecting a Site Installing the SwitchEthernet Cabling Package Contents Equipment ChecklistOptional Rack-Mounting Equipment Rack Mounting MountingDesktop or Shelf Mounting Installing the Switch in a RackInserting an SFP Transceiver into a Slot Installing an Optional SFP TransceiverConnecting to the Console Port Connecting to a Power SourceSerial Cable Wiring Switch’s 8-Pin Null Modem PC’s 9-Pin Wiring Map for Serial CableInstalling the Switch Making Network Connections Connecting Network DevicesTwisted-Pair Devices Cabling GuidelinesNetwork Wiring Connections Connecting to PCs, Servers, Hubs and SwitchesFiber Optic SFP Devices Network Wiring ConnectionsMaking Connections to SFP Transceivers Connectivity RulesMbps Gigabit Ethernet Collision Domain 1000BASE-T Cable RequirementsMbps Fast Ethernet Collision Domain Mbps Ethernet Collision Domain Cable Labeling and Connection RecordsDiagnosing Switch Indicators Appendix a TroubleshootingPower and Cooling Problems In-Band Access InstallationTwisted-Pair Cable and Pin Assignments Appendix B Cables10BASE-T/100BASE-TX Pin Assignments Crossover Wiring Straight-Through WiringTwisted-Pair Cable and Pin Assignments B 1000BASE-T Pin AssignmentsAdjusting Existing Category 5 Cabling to Run 1000BASE-T Cable Testing for Existing Category 5 CableFiber Standards Dispersion-Shifted Fiber Cables Physical Characteristics Appendix C SpecificationsManagement Features Switch FeaturesCompliances StandardsSpecifications Appendix D Ordering Information Ordering Information 10BASE-T GlossaryCSMA/CD LED UTP Numerics IndexIndex-2 Page 150200000032A R01