SMC Networks SMC8126PL2-F manual Connecting to a Power Source, Connecting to the Console Port

Page 38

3 Installing the Switch

Connecting to a Power Source

To connect a device to a power source:

1.Insert the power cable plug directly into the socket located at the back of the device.

Figure 3-6 Power Socket

2.Plug the other end of the cable into a grounded, 3-pin, AC power source.

Note: For international use, you may need to change the AC line cord. You must use a line cord set that has been approved for the receptacle type in your country.

3.Check the front-panel LEDs as the device is powered on to be sure the Power LED is on. If not, check that the power cable is correctly plugged in.

4.If you have purchased a Redundant Power Supply, connect it to the switch and to an AC power source now.

Connecting to the Console Port

The RJ-45 serial port on the switch’s front panel is used to connect to the switch for out-of-band console configuration. The on-board configuration program can be accessed from a terminal or a PC running a terminal emulation program. The pin assignments used to connect to the serial port are provided in the following table.

 

8

8

1

 

 

1

Figure 3-7 Serial Port (RJ-45) Pin-Out

3-6

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Installation Guide TigerSwitch 10/100/1000 Installation Guide Page Warranty and Product Registration Compliances and Safety Warnings CE Mark Declaration of Conformance for EMI and Safety EEC Safety Compliance France and Peru only France et Pérou uniquement Francia y Perú únicamente Vii Advertencias y mensajes de precaución Purpose Page Contents Appendix a Troubleshooting Contents Tables Figures Xvi Front Panel Network Management Options Switch ArchitecturePower-over-Ethernet Capability SFP Slots Description of Hardware10/100/1000BASE-T Ports Port and System Status LEDsLED Power Supply Socket Mode PoE/Link ButtonOptional Redundant Power Unit Expandability Features and BenefitsConnectivity PerformanceIntroduction to Switching Network PlanningApplication Examples Collapsed BackboneNetwork Aggregation Plan Network Aggregation PlanRemote Connections with Fiber Cable Remote Connections with Fiber CableMaking Vlan Connections Making Vlan ConnectionsApplication Notes Ethernet Cabling Installing the SwitchSelecting a Site Optional Rack-Mounting Equipment Equipment ChecklistPackage Contents Mounting Rack MountingInstalling the Switch in a Rack Desktop or Shelf MountingInstalling an Optional SFP Transceiver Inserting an SFP Transceiver into a SlotConnecting to a Power Source Connecting to the Console PortWiring Map for Serial Cable Serial Cable Wiring Switch’s 8-Pin Null Modem PC’s 9-PinInstalling the Switch Twisted-Pair Devices Connecting Network DevicesMaking Network Connections Cabling GuidelinesConnecting to PCs, Servers, Hubs and Switches Network Wiring ConnectionsNetwork Wiring Connections Fiber Optic SFP DevicesConnectivity Rules Making Connections to SFP TransceiversMbps Fast Ethernet Collision Domain 1000BASE-T Cable RequirementsMbps Gigabit Ethernet Collision Domain Cable Labeling and Connection Records Mbps Ethernet Collision DomainPower and Cooling Problems Appendix a TroubleshootingDiagnosing Switch Indicators Installation In-Band Access10BASE-T/100BASE-TX Pin Assignments Appendix B CablesTwisted-Pair Cable and Pin Assignments Straight-Through Wiring Crossover Wiring1000BASE-T Pin Assignments Twisted-Pair Cable and Pin Assignments BFiber Standards Cable Testing for Existing Category 5 CableAdjusting Existing Category 5 Cabling to Run 1000BASE-T Dispersion-Shifted Fiber Cables Appendix C Specifications Physical CharacteristicsSwitch Features Management FeaturesStandards CompliancesSpecifications Appendix D Ordering Information Ordering Information Glossary 10BASE-TCSMA/CD LED UTP Index NumericsIndex-2 Page 150200000032A R01
Top Page Image Contents