Smith Cast Iron Boilers JW527, JWF507, JW727 Introduction, Consumer Responsibilities, II Safety

Page 3

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING”.

DANGER You can be killed or seriously injured if you don’t immediately follow instructions.

WARNING You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the State of California to cause cancer, birth defects, or other reproductive harm, and requires businesses to warn of potential exposure to such substances.

WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

This appliance can cause low-level exposure to some of the substances listed, including formalde- hyde, carbon monoxide, and soot.

I) INTRODUCTION

Thank you for purchasing a John Wood Oil Fired Water Heater. Properly installed and maintained, it will provide years of trouble free service.

This Oil Fired Water Heater has been developed to supply domestic hot water for normal residential demands. Any deviation from this application could affect your warranty.

Consumer Responsibilities

This manual has been prepared to acquaint you with the installation, operation and maintenance of your oil fired water heater and provide important safety information in these areas. It is your responsibility to ensure that your water heater is properly installed and cared for.

FAILURE TO FOLLOW THE INSTRUCTIONS IN THIS MANUAL MAY RESULT IN SERIOUS BODILY INJURY AND/OR PROPERTY DAMAGE. THOROUGHLY READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE YOU ATTEMPT TO INSTALL, OPERATE OR MAINTAIN THIS HEATER.

Installation and service requires trade knowledge in the areas of plumbing, electricity, venting, air supply and oil sup- ply. If you lack these skills or have difficulty understanding these instructions, you should not proceed. Enlist the help of a qualified service technician to install this water heater.

Examples of qualified service technicians include those trained in the plumbing and heating industry, local oil supply personnel or an authorized service person.

The manufacturer and seller of this water heater will not assume any liability for any property damage, personal

injury or death resulting from improper sizing, installation or failure to comply with these instructions.

The warranty on this water heater is in effect only when the water heater is installed and operated in accordance with these instructions. An identifying data plate can be found at the front of your water heater. When referring to your water heater, always have the information listed on the data plate readily available.

Protect your warranty: Regularly service your water heater as directed in the "Maintenance" section of this manual. Retain your original receipt as proof of purchase.

Do not discard this manual. You or future users of this water heater will need it for reference.

II) SAFETY

In addition to the installation instructions found in this man- ual, the water heater must be installed in accordance with all local and provincial or state codes or, in the absence of such, with the latest editions of the following specifications.

For Installations in Canada:

“Installation Code for Oil-Burning Equipment (CSA B139-04)” and

“Canadian Electrical Code Part 1 (C22.1)” available from:

Canadian Standards Association,

5060 Spectrum Way,

Mississauga, Ontario, Canada

L4W 5N6

– 3 –

Page 2 Page 4
Image 3
Page 2 Page 4
Contents For Your Safety What to do if YOU Smell OILImmediately call your oil supplier Table of Contents Consumer Responsibilities II SafetyFor Installations in Canada IntroductionRelief Valve Requirements T&P For Installations in the United StatesSafety Warning Flammable Vapours Safety Warning ScaldingLocation Requirements Clearances and Accessibility Oil SupplyEarthquake Zones JWF307V Installation Dimensions Center Flue Models Ducted Furnace Room And/or room Where the water heater is locatedAir Requirements Air SupplyVent and Exhaust Connections Blocked Vent Safety Switch Power VentingWater Supply Plumbing Connections Center Flue Filling the Water HeaterDischarge Line/Driptube Temperature and Pressure Relief ValveVacuum Relief Valves Closed System/Thermal ExpansionElectrical Supply Installation Of The Aquastat Temperature Control48245 Installation Checklist Water Temperature RegulationIV Operation Anode Rod/Water Odour Anode MaintenanceWater Heater Sounds Smoke/OdourMaintenance Re-Starting The Heater After Shut- Down Shut Down For Extended PeriodsVI Combo Heating Combo Heating Baseboard InstallationVII OIL Burner Listing Beckett AFG GSW-J5006 WHO is Covered Limited WarrantyHOW the Original Owner can Make a Warranty Claim

JW327, JW517, JWF307V, JWF657, JWF507 specifications

Smith Cast Iron Boilers have established a strong reputation in the heating industry for their durable, efficient, and reliable products. Among their notable models are the JWF507, JW717, JWF657, JW327, and JW517. Each of these models incorporates advanced technologies and unique features tailored to meet various heating demands.

The JWF507 is renowned for its exceptional thermal efficiency. This boiler utilizes a water-to-water heat exchanger, providing efficient heat transfer, which significantly reduces fuel consumption. Its robust cast iron construction ensures longevity, even in harsh conditions, while an oversized heat exchanger design enhances performance and reliability.

The JW717 model stands out with its ability to handle large-scale heating needs. This boiler features a multi-pass design that maximizes heat transfer and minimizes the chance of overheating. Additionally, it is equipped with an advanced control system that allows for precise temperature adjustments, ensuring optimal comfort in residential and commercial settings.

The JWF657 introduces a unique burner design, which improves combustion efficiency and reduces emissions. This model also features a built-in pump which enhances the system's circulation, helping to maintain consistent and comfortable heating throughout the space. With its energy-efficient attributes, the JWF657 is a top choice for environmentally-conscious consumers.

Next in line, the JW327 model is designed for versatility and adaptability. This boiler can easily be integrated into various heating systems, making it suitable for both retrofit and new construction projects. Its compact size allows for easy installation in tight spaces, while its high-efficiency rating contributes to lower energy bills.

Lastly, the JW517 model is known for its reliability and user-friendly design. This boiler is equipped with an intuitive control panel, making operation simple and straightforward. Its rugged cast iron construction is designed to withstand rigorous use, providing peace of mind for users who seek a dependable heating solution.

In summary, Smith Cast Iron Boilers offer a diverse portfolio with models like the JWF507, JW717, JWF657, JW327, and JW517, each boasting unique features and technologies. From high thermal efficiency and advanced combustion systems to user-friendly designs and rugged durability, these boilers are crafted to deliver optimal performance in various heating applications. Whether for residential or commercial use, these models exemplify the superior quality and innovation that Smith Cast Iron Boilers is known for.
Top Page Image Contents