Solid State Logic CSB 120 Recovery Rate in Gallons PER Hour AT Temperature Rise, Gal Litre

COMMERCIAL

RECOVERY RATE IN GALLONS PER HOUR AT TEMPERATURE RISE OF

Standard	BTU/ Hour	3O°F	40°F	5O°F	60°F	70°F	8O°F	9O°F	100°F	110°F	120°F	130°F	140°F
kW Input		17°C	22°C	28°C	33°C	39°C	45°C	50°C	56°C	61°C	67°C	72°C	78°C
6	20,478	82	62	49	41	35	31	27	25	22	21	19	18
		310	233	166	155	133	116	103	93	85	78	72	66
9	30,717	123	92	74	62	53	46	41	37	34	31	28	26
		465	349	279	233	199	174	155	140	127	116	107	100
12	40,956	164	123	98	82	70	61	55	49	45	41	38	35
		620	465	372	310	266	233	207	186	169	155	143	133
13.5	46,075	184	138	111	92	79	69	62	55	50	46	43	40
		698	523	419	349	299	262	233	209	190	174	161	150
15	51,195	205	154	123	102	88	77	68	61	56	51	47	44
		775	582	465	388	332	291	258	233	211	194	149	166
18	61,434	246	184	148	123	105	92	82	74	67	62	57	53
		930	698	558	465	399	349	310	279	254	233	215	199
24	81,912	328	246	197	164	140	123	109	98	90	82	76	70
		1241	930	744	620	532	465	414	372	338	310	286	266
27	92,151	369	276	221	185	158	138	123	111	101	92	85	79
		1396	1047	938	609	509	523	465	410	391	340	322	299
30	102,390	410	307	246	205	176	154	137	123	112	102	95	88
		1551	1163	930	775	665	582	517	465	423	388	358	332
36	122,868	492	369	295	246	211	184	164	148	134	123	113	105
		1861	1396	1117	930	798	698	620	556	508	465	429	399
40.5	138,226	554	418	332	277	237	208	185	166	151	138	128	119
		2094	1570	1256	1047	897	785	698	628	634	582	537	498
45	153,585	615	461	369	307	263	230	205	184	168	154	142	132
		2326	1745	1398	1163	997	872	755	698	634	582	537	498
54	184,302	738	554	443	359	316	277	246	221	201	185	170	158
		2791	2094	1675	1396	1196	1047	930	837	761	696	644	598

Figured at 1 kW (3413 BTU) = 4.1 Gallons at 100°F temperature rise.

Model	Tank				Dimensions
	Capacity
Number			A		B			C
	gal.	litre	in.	cm	in.	cm	in.		cm
CSB 52**IFE	50	189	55 3/4	142	21 3/4	55.2	27		68.6
CSB 82**IFE	80	300	60 1/4	153	25 1/2	64.8	31		78.7
CSB 120**IFE	119	450	62 1/4	158.1	29 1/2	75.0	35		88.9

Inlet/

Outlet (NPT)

in.	cm
1 1/4
	3.2
1 1/4
	3.2
1 1/4
	3.2

Approx. Ship.

Wt. (Lbs.)

Ib kg

265120

280127

390177

kW			Model Numbers
		Tank Capacity in Gallons
Input	50		80	119
6	CSB 52 6 IFE		CSB 82 6 IFE	CSB 120 6 IFE
9	CSB 52 9 IFE		CSB 82 9 IFE	CSB 120 9 IFE
12	CSB 52 12 IFE		CSB 82 12 IFE	CSB 120 12 IFE
13.5	CSB 52 135 IFE		CSB 82 135 IFE	CSB 120 135 IFE
15	CSB 52 15 IFE		CSB 82 15 IFE	CSB 120 15 IFE
18	CSB 52 18 IFE		CSB 82 18 IFE	CSB 120 18 IFE
24	CSB 52 24 IFE		CSB 82 24 IFE	CSB 120 24 IFE
27	CSB 52 27 IFE		CSB 82 27 IFE	CSB 120 27 IFE
30	CSB 52 30 IFE		CSB 82 30 IFE	CSB 120 30 IFE
36	CSB 52 36 IFE		CSB 82 36 IFE	CSB 120 36 IFE

Number

Of

Elements

3

3

3

3

3

3*

6

6

6

6*

Element Wattage

2,000

3,000

4,000

4,500

5,000

6,000

4,000

4,500

5,000

6,000

Full Load Current In Amperes

	Single Phase			Three Phase
208V	240V	277V	480V	208V	240V	480V
28.8	25.0	21.7	12.5	16.7	14.4	7.2
43.3	37.5	**32.5	18.8	25.0	21.7	10.8
57.7	50.0	43.3	25.0	33.3	28.9	14.4
64.9	56.3	**48.7	28.1	37.5	32.5	16.2
72.1	62.5	**54.2	31.3	41.6	36.1	18.0
86.5	75.0	65.0	37.5	50.0	43.3	21.7
115.4	100.0	86.6	50.0	66.6	57.7	28.9
129.8	112.5	**97.5	56.3	74.9	65.0	32.5
144.2	125.0	**108.3	62.5	83.3	72.2	36.1
173.1	150.0	130.0	75.0	99.9	86.6	43.3

*208 volt models may contain three (3) additional elements. ** Elements available in incoloy only.

	SUGGESTED SPECIFICATION
The heater(s) shall be SandBlaster CSB Series Commercial Electric Model Number ______________ as manufactured by State Industries shall be rated at
____________kW,_______volts, ____________ phase, 60 cycle AC, and listed by Underwriters’ Laboratories and approved to the NSF Standard 5 by UL. Tank(s) shall
be ________ gallon capacity. Tanks shall be 50, 80 and 119 gallon capacity and shall have 150 psi working pressure and be equipped with extruded high density anode.
Water heater shall have LCD display with built-in diagnostic and troubleshooting information. All internal surfaces of the heater(s) exposed to water shall be glasslined with
an alkaline borosilicate composition that has been fused-to-steel by firing at a temperature range of 1400°F to 1600°F. Electric heating elements shall be gold plated low
watt density screw-in type. Control circuit shall be factory fused and include an immersion thermistor temperature probe with built-in ECO control. All internal circuits shall
be fused. The outer jacket shall be of baked enamel finish and shall be provided with full size control compartment for performance of service and maintenance through
hinged front panel and shall enclose the tank with foam insulation. Electrical junction box with heavy duty terminal block shall be provided. The drain valve shall be located
in the front for ease of servicing. Heater tank shall have a three year limited warranty as outlined in the written warranty. Manufacturer shall supply CSA Certified and ASME
Rated T&P Relief Valve. Fully illustrated instruction manual to be included. Meets standby loss requirements of the U.S. Department of Energy and current edition
ASHRAE/IESNA 90.1.
For more information on this product contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024 Toll-free USA	SOLID.STATE.
www.statewaterheaters.com

SCESS00508 Revised May 2011