Spectra Watermakers CF-0.5-10, SF-MT-0.5-10 Table of Contents, Three Year Manufacturers Warranty

Page 2

SpectraPure®

 

TABLE OF CONTENTS

 

Table of Contents and Terms

2-3

System Specifications

 

RO Feed Water Requirements

4

System Description

5-7

Systems Information

 

Testing the RO Membrane Rejection Rate

7

System Initialization

 

Proceedures for Installation

8

Checking The Concentrate to Purified Water Ratio

9-10

Flow Restrictor Adjustment and replacement

11-12

Filter Replacement Proceedures

 

Sediment Filter Replacement

13

Carbon Filter Replacement

13

Deionization Cartridge Replacement

14

RO Membrane Diagnostic

15-17

Troubleshooting Guide

 

Troubleshooting Guide for the System

18

Using the Pressure Gauge

19

Maintenance

19

Storage

19

Choosing a Mounting Location

20

Tips for Long Membrane Life

20

Testing Performance of the Membrane

21-22

Warranty

23

Replacement & Optional Parts

24

SpectraPure®Inc. assumes no responsibility for water damage due to leaks. It is the user’s responsibility to determine that the system is leak-free.

COPYRIGHT 2002-2007© BY SPECTRAPURE INC

ALL RIGHTS RESERVED

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written permission of SpectraPure Inc.

SpectraPure®

THREE YEAR MANUFACTURERS WARRANTY

Effective on products purchased after March 10, 2005.

SpectraPure, Inc.® warrants the product to the original owner only to be free of defects in material and workmanship for a period of three years from the date of receipt. SpectraPure’s liability under this warranty shall be limited to repairing or replacing at SpectraPure’s option, without charge, F.O.B. SpectraPure’s factory, any product of SpectraPure’s manufacture. SpectraPure will not be liable for any cost of removal, installation, transportation or any other charges which may arise in connection with a warranty claim. Products which are sold but not manufactured by SpectraPure are subject to the warranty provided by the manufacturer

of said products and not by SpectraPure’s warranty. SpectraPure will not be liable for damage or wear to products caused by abnormal operating conditions, accident, abuse, misuse, unauthorized alteration or repair or, if the product was not installed in accordance with SpectraPure’s or other manufacture’s printed installation and operating conditions, or damage caused by hot water, freezing, flood, fire or acts of God.

SpectraPure will not be responsible for any consequential damages arising from installation or use of the product, including any water or mold damage due to flooding which may occur due to malfunction or faulty installation, including, but not limited to failure by installer to over- or under-tighten fittings, housings, and/ or push-style fittings, or improper installation of push-style fittings. Consumable items such as pre filters and membranes are not covered under the two year warranty.

SpectraPure warrants (pro-rated) the performance of tested SpectraSelect™ RO membrane elements only, for one year from date of receipt by the buyer, providing that the loss of performance was not caused by fouling , neglect or water conditions exceeding the feed water parameters listed in the applicable product manual (refer to detailed membrane warranty information). SpectraPure will, on confirmation of loss of performance during the warranty period, credit the pro-rated amount of the current catalog price of the element. The disposable filters and cartridges are not covered under the warranty.

To obtain service under this warranty, the defective system or components must be returned to SpectraPure with proof of purchase, installation date, failure date and supporting installation data. Any defective product to be returned to the factory must be sent freight prepaid; documentation supporting the warranty claim and a Return Goods Authorization (RGA) number must be included. SpectraPure will not be liable for shipping damages due to the improper packaging of the returned equipment and all returned goods must also have adequate insurance coverage and a tracking number.

SpectraPure will not pay for loss or damage caused directly or indirectly by the presence, growth, proliferation, spread or any activity of “fungus”, wet or dry rot or bacteria. Such loss or damage is excluded regardless of any other cause or event that contributes concurrently or in any sequence to the loss. We will not pay for loss or damage caused by or resulting from continuous or repeated seepage or leakage of water, or the presence or condensation of humidity, moisture or vapor, that occurs over a period of 14 days or more. “Fungus” and “fungi” mean any type or form of fungus or Mycota or any by-product or type of infestation produced by such fungus or Mycota, including but not limited to, mold, mildew, mycotoxins, spores, scents or any biogenic aerosols.

SpectraPure will not be liable for any incidental or consequential damages, losses or expenses arising from installation, use, or any other causes. There are no expressed or implied warranties, including merchantability or fitness for a particular purpose, which extend beyond those warranties described or referred to above.

*The three year limited warranty does not apply to consumable items, including but not limited to, filters and cartridges unless specifically stated above

 

SpectraPure®Inc. 480.894.5437 Call us toll-free 1.800.685.2783

2

2167 East Fifth St, Tempe, Arizona 85281

 

SpectraPure®Inc. Fax 480.894.6109 Fax us toll-free 1.877.527.7873 E-mail: spectra@spectrapure.com Visit us on the web www.spectrapure.com 23

Image 2
Contents Replacement Parts Single or Dual Membrane ModelTable of Contents Three Year Manufacturers WarrantyTerms and Conditions of Sale Membrane Output Calculation ExampleSystem Specifications Testing the Performance of the MembraneTips for Long Membrane Life Temperature ExtremesChoosing a Mounting Location System DescriptionMetering and Diagnositcs Using the Pressure GaugeMaintenance StorageTesting the RO Membrane Rejection Rate Troubleshooting Guide for RO/DI SystemsSystem Initialization CheckRO Membrane Replacement Checking the Concentrate to Purified Water RatioGreen RO Membrane DiagnosticsFR-90YELLOW or White Flow Restrictor REMOVAL, Adjustment Replacement Maxcap RO/DI Maintenance and ReplacementSilicaBuster Maintenance and Replacement Sediment PRE-FILTER Replacement Carbon Block Filter Replacement

CF-0.5-10, SF-MT-0.5-10, MEM-90,150 specifications

Spectra Watermakers is renowned for its advanced water desalination technology, providing reliable fresh water solutions for various applications. Among their notable products are the CF-0.5-10, SF-MT-0.5-10, MEM-90, and MEM-150 systems, each designed to meet specific water production needs while maintaining ease of use and efficiency.

The CF-0.5-10 model is a compact and highly efficient watermaker that delivers up to 10 gallons per hour. Its primary feature is reverse osmosis technology, which effectively removes salt and impurities from seawater, resulting in high-quality potable water. The system is equipped with an energy recovery device that minimizes energy consumption, making it a sustainable choice for boaters and coastal residents alike. With a lightweight design, the CF-0.5-10 is easy to install and maintain, ensuring that users can consistently access fresh water in remote locations.

The SF-MT-0.5-10 is another impressive model from Spectra Watermakers. It offers similar efficiency and capacity but includes additional features for marine applications. This model utilizes a high-quality stainless steel frame and marine-grade components, enhancing durability amidst harsh conditions. The SF-MT-0.5-10 includes an intuitive user interface, allowing for easy operation and monitoring of water production levels. Its compact size makes it suitable for installation in tight spaces on yachts or small vessels.

For those needing larger production capacities, the MEM-90 and MEM-150 systems provide impressive output. The MEM-90 can produce up to 90 gallons per day, while the MEM-150 takes it a step further with a daily capacity of 150 gallons. Both systems leverage advanced membrane technology, ensuring robust performance and long-term reliability. Features such as automatic pressure regulation and user-friendly digital controls provide operators with a seamless experience.

Additionally, these systems are designed with energy efficiency in mind, employing innovative technologies to reduce power consumption. Their rugged construction ensures that they can withstand various environmental stresses, making them ideal for use in both commercial and recreational settings.

In conclusion, Spectra Watermakers’ CF-0.5-10, SF-MT-0.5-10, MEM-90, and MEM-150 systems exemplify quality and innovation in water desalination. Each model brings unique features to meet diverse needs, ensuring that users have a reliable source of fresh water wherever they may be. Whether for marine use or land-based applications, Spectra’s watermakers guarantee performance, efficiency, and durability.