Samsung DVD-VR330/XEF Concerning Copy Control Signals, Pausing / Resuming, With Cprm VR mode

Concerning Copy Control Signals

TV broadcasts that contain copy control signals may have one of the following three signal types, Copy-Free, Copy- Once and Copy-Never. If you want to record a copy-once type programme, use DVD-RW with CPRM in VR Mode.

	Copy-Free	Copy-Once	Copy-Never
DVD-RW(Ver.1.1)	O	-	-
DVD-RW(Ver.1.1)
with CPRM
VR mode	O	O*	-
DVD-R	O	-	-

Once Copy Once has been recorded, additional record- ing cannot be performed.

- Content Protection for Recordable Media (CPRM)

CPRM is a mechanism that ties a recording to the media on which it is recorded. It is supported by some DVD recorders, but not by many DVD players.

Each blank recordable DVD has a unique 64-bit media ID etched in the BCA. When protected content is recorded onto the disc, it can be encrypted with a 56- bit C2 (Cryptomeria) cipher derived from the media ID. During playback, the ID is read from the BCA and used to generate a key to decrypt the contents of the disc.

If the contents of the disc are copied to other media, the ID will be absent or wrong and the data will not be decryptable.

	Press the PROG/TRK			( /		) buttons or number
3 buttons to select the station you want to record.
4	Press the REC SPEED				button repeatedly, to select the
	recording speed (quality).
	• XP (High, approx. 1 hour) ➝SP (Standard,
	approx. 2 hours) ➝LP (Low, approx. 4 hours)
	➝ EP (Extended Play, approx. 6hours/8hours)
		-RW	VR	XP		PR 7
		Available Time 00:28

5	Press the REC button.
6	Press the STOP button to stop or finish a record-
	ing in progress.

• The message “Updating the disc information. Please wait for a moment” is displayed.

Recording the current programme you are watching

1.Check the antenna cable is connected.

2.Check the remaining time on the disc.

DVD-RW discs should be formatted in advance before beginning recording. Most new discs are sold unformat- ted. Make sure to format your unformatted discs before recording.

1	Press the OPEN/CLOSE		button and place a recordable
	disc on the disc tray.
2	Press the OPEN/CLOSE		button to close the disc tray.
	Wait until LOAD	disappears from the front panel display.

Pausing / Resuming

•Press the REC PAUSE button to pause a recording in progress.

•Press the REC PAUSE button again during pause to resume recording.

•You can switch channels by pressing the

PROG/TRK	( / ) buttons while recording
pauses.
■	You can not change the recording mode and
Note	the programme while recording.

■Recording will stop automatically if there is no free space left for recording.

■Up to 99 titles can be recorded onto a disc.

■If the power interrupted due to power failure or other reasons, the title being recorded will not be saved onto the disc.

■Recording will stop automatically if a copy protected image is selected.

■Do not use DVD-R authoring discs with this unit.

Recording

English - 59