Samsung DVD-VR330/XET Unpacking, Accessories, If the remote control does not operate properly

Getting Started

Step 6	Finalising & Playing on
	other DVD components

To play your DVD on other DVD components, finalis- ing may be necessary. First, finish all editing and recording operations, then finalise the disc.

When using a DVD-RW disc in VR Mode

Although finalising is generally unnecessary when playing the disc on a VR Mode compatible compo- nent, a finalised disc should be used for playback.

When using a DVD-RW disc in V mode

The disc should be finalised first to enable playback on anything other than this recorder. No more editing or recording can be made on the disc once it has been finalised.

When using a DVD-R disc

You should finalise the disc to play it on a component other than this recorder. You cannot edit or record on the disc once it has been finalised.

Unpacking

Accessories

•Audio/Video Cable

•RF Cable for TV Control

•Remote control.

•Batteries for Remote Control (AAA Size)

•User’s Manual

•Quick Guide

•HDMI Cable (DVD-VR335,VR336 Only)

Preparing the Remote Control

Install Batteries in the Remote Control

•Open the battery cover on the back of the remote control.

•Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly.

•Replace the battery cover.

If the remote control does not operate properly:

•Check the polarity +/- of the batteries (Dry-Cell)

•Check if the batteries are drained.

•Check if the remote sensor is blocked by obstacles.

•Check if there is any fluorescent lighting nearby.

Dispose of batteries according to local environmental regulations. Do not put them in the household trash.

10 - English