Spectra Watermakers Newport 400 specification

Tank Switch Installation and Operation:

There are two sets of terminals on the MPC-5000 PCB that can be used in four dif- ferent configurations to automatically start and stop the watermaker or to automatically stop the watermaker when the tank(s) are full without the auto start feature. These terminals are on the green ten pin connector and are labeled “Float Switch 1” and “Float Switch 2.” Float Switch 1 is the tank full switch and Float Switch 2 is the tank empty switch.

If the unit is wired for both Autostart and Autostop, it can be put into AutoFill Mode by pushing and holding the Auto Run switch on the MPC-5000 display. In this mode the water- maker will start whenever the water level drops below the tank empty switch, so that it is open (not conducting electricity). When the tank fills up and both the tank full switch and the tank empty switch have remained closed for two minutes, the watermaker will shut down and flush itself. The water maker will start back up when the water level drops below the tank empty switch and it remains open for 2 minutes. This configuration allows for com- pletely automatic operation. If the watermaker does not need to start up within five days it will automatically do a fresh water flush. AutoFill mode can be ended by pushing the stop button or the Autoflush button. If the watermaker is in Autorun mode it can be put into Autofill mode without stopping it by holding down the Autorun button.

If the owner prefers to install the automatic shutoff feature without the automatic start up option, only the tank full switch is used. A jumper must be placed between the tank empty terminals (Float switch 2) in place of the tank empty switch, because the watermaker will only shut down if both sets of terminals are closed. To use this mode the watermaker must be started up with the Stop/start button or the Autorun button. After the unit starts up, then press and hold the Autorun button until the display reads “Auto Fill Mode”. The water- maker will fill the tank and automatically enter Autoflush mode.

It is possible to use the autofill feature with 2 tanks. A double throw electrical switch must be installed in a convenient location. If only the single tank full switch is installed in each tank connect the wire From the Float Switch 1 terminal “1” to the common on the switch and run separate wires from the switch to each tank switch. The second wires can both be run to the Float Switch 1 terminal 2. If you are using two switches in each tank you will need a double pole double throw switch.

Newport 400 specifications

The Spectra Watermakers Newport 400 is a state-of-the-art desalination system designed for yachts and boats seeking reliable and efficient freshwater production. This innovative watermaker is known for its compact design, high performance, and user-friendly features. With the ability to produce up to 400 gallons of freshwater per day, the Newport 400 is ideal for extended cruising, offshore adventures, or as a backup water supply.

One of the standout features of the Newport 400 is its patented Spectra Reverse Osmosis technology. This advanced system harnesses the power of reverse osmosis to remove salt and impurities from seawater, ensuring the production of clean and safe drinking water. The Newport 400 operates with exceptional energy efficiency, requiring significantly less power compared to traditional watermakers. This is particularly beneficial for boats relying on limited energy sources like solar panels or generators.

The Newport 400 is engineered for ease of operation and maintenance with a user-friendly control panel. Operators can easily monitor key parameters such as water output, pressure, and system status. The intuitive interface makes it simple to adjust settings and troubleshoot potential issues. Additionally, the system is constructed from high-quality corrosion-resistant materials, ensuring durability and longevity in harsh marine environments.

An impressive characteristic of the Spectra Newport 400 is its ultra-quiet operation. This watermaker is designed to minimize noise, making it perfect for use in the close quarters of a yacht without disturbing the peace on board. The integration of advanced technologies further enhances its performance, including a sophisticated water pre-filtration system that reduces the risk of membrane fouling.

The Newport 400 is also designed with versatility in mind. It can be easily integrated into various onboard systems, allowing for simple installation and operation. Its compact size means it can fit into tight spaces on smaller vessels without sacrificing performance.

In summary, the Spectra Watermakers Newport 400 is a reliable, efficient, and quiet solution for generating freshwater in a marine environment. Its advanced reverse osmosis technology, ease of use, and robust construction make it an ideal choice for boaters seeking independence from shore-based water sources. Whether for leisurely cruising or serious ocean voyaging, the Newport 400 stands out as a top-tier watermaker for modern maritime adventures.