Installation Basics, Thru-hulls | Spectra Watermakers Newport 400

Installation Basics

•Read the directions!

•Avoid tight hose bends and excessive runs.

•Use heavy gauge wire.

•Install feed pump as low as possible.

•Use a dedicated thruhull with scoop type strainer.

Thru-hulls

Thruhull

Not Supplied.

Flow

It is mandatory that a dedicated 3/4” to 1” forward facing scoop type intake thru-hull and seacock be installed. Install the intake for the system close to the middle and as far below the water line as possible. Thru-hulls in the bow area are susceptible to air intake in rough conditions. Sharing a thru-hull with another system is not acceptable and will void the war- ranty. Sharing a thru-hull can introduce unforeseen problems such as intermittent flow re- striction, air bubbles, and contaminates. For racing boats and high speed power boats above 15 knots a retractable snorkel-type thru-hull fitting is preferred to be able to pick up water away from the hull.

Do not install the intake close to or downstream of a head discharge. Install as far below the waterline and as close to center line as possible to avoid contamination and air induction.

The brine discharge through-hull should be mounted above the waterline, in or just above the boot stripe to minimize water lift.

Double clamp all hose connections below the waterline.

Pipe Fitting Instruction

Plastic to plastic fittings should have 3 to 4 wraps of Teflon tape and will thread almost all the way in.

Avoid getting dirt or debris into the piping or hoses during assembly. A small bit of de- bris can stop the system! Avoid getting tape over the end of fittings that might get into the system. To insure this does not happen, leave the very first thread uncoated.

Avoid restrictions or long runs on the entire inlet side of the plumbing from the thru hull to the main feed pump module.

Prevent tight bends and excessive elbows. Any restrictions will hamper system performance. Secure the piping away from moving objects such as engine belts and hatches. Prevent chafe on the tubing as required. Test and inspect all piping and hose clamps after several hours of operation.

Wiring

•Pay attention to wire size or system performance will be impaired.

•Perform wiring to UL, ABYC, CE or applicable standards.

Newport 400 specifications

The Spectra Watermakers Newport 400 is a state-of-the-art desalination system designed for yachts and boats seeking reliable and efficient freshwater production. This innovative watermaker is known for its compact design, high performance, and user-friendly features. With the ability to produce up to 400 gallons of freshwater per day, the Newport 400 is ideal for extended cruising, offshore adventures, or as a backup water supply.

One of the standout features of the Newport 400 is its patented Spectra Reverse Osmosis technology. This advanced system harnesses the power of reverse osmosis to remove salt and impurities from seawater, ensuring the production of clean and safe drinking water. The Newport 400 operates with exceptional energy efficiency, requiring significantly less power compared to traditional watermakers. This is particularly beneficial for boats relying on limited energy sources like solar panels or generators.

The Newport 400 is engineered for ease of operation and maintenance with a user-friendly control panel. Operators can easily monitor key parameters such as water output, pressure, and system status. The intuitive interface makes it simple to adjust settings and troubleshoot potential issues. Additionally, the system is constructed from high-quality corrosion-resistant materials, ensuring durability and longevity in harsh marine environments.

An impressive characteristic of the Spectra Newport 400 is its ultra-quiet operation. This watermaker is designed to minimize noise, making it perfect for use in the close quarters of a yacht without disturbing the peace on board. The integration of advanced technologies further enhances its performance, including a sophisticated water pre-filtration system that reduces the risk of membrane fouling.

The Newport 400 is also designed with versatility in mind. It can be easily integrated into various onboard systems, allowing for simple installation and operation. Its compact size means it can fit into tight spaces on smaller vessels without sacrificing performance.

In summary, the Spectra Watermakers Newport 400 is a reliable, efficient, and quiet solution for generating freshwater in a marine environment. Its advanced reverse osmosis technology, ease of use, and robust construction make it an ideal choice for boaters seeking independence from shore-based water sources. Whether for leisurely cruising or serious ocean voyaging, the Newport 400 stands out as a top-tier watermaker for modern maritime adventures.