Spectra Watermakers Newport 400 instruction

Connection of Optional Accessories

Use of any external devices not approved by the factory may cause permanent damage to the controller and is not covered by the Spectra warranty. Accessory outputs are lim- ited to 2 amps maximum load! Do not connect motors, pumps, etc to accessory outputs.

Optional Z-brane System: Detailed instructions are included in the Z-Brane section. Connect to an uninterruptible 12 of 24Volt DC power source.

Ultraviolet Sterilizer: Detailed instructions are included with the sterilizer kit. The UV sterilizer lamp module and ballast unit should mount vertically, with the product water inlet at the bottom, outlet at the top. The ballast wires plug into the end of the bulb in the lamp module. The ballast RED wire connects to “STER” terminal on the MPC board, and the bal- last BLACK wire connects to the “GND” terminal. If the wires must be extended, use mini- mum 16AWG wire.

External Buzzer(s): In addition to the external buzzer(s) installed at each remote control display panel, a buzzer unit may be installed at the control box. The buzzer RED wire con- nects to the “BUZZ” terminal on the MPC board, and the buzzer BLACK wire connects to “GND.”

Newport 400 specifications

The Spectra Watermakers Newport 400 is a state-of-the-art desalination system designed for yachts and boats seeking reliable and efficient freshwater production. This innovative watermaker is known for its compact design, high performance, and user-friendly features. With the ability to produce up to 400 gallons of freshwater per day, the Newport 400 is ideal for extended cruising, offshore adventures, or as a backup water supply.

One of the standout features of the Newport 400 is its patented Spectra Reverse Osmosis technology. This advanced system harnesses the power of reverse osmosis to remove salt and impurities from seawater, ensuring the production of clean and safe drinking water. The Newport 400 operates with exceptional energy efficiency, requiring significantly less power compared to traditional watermakers. This is particularly beneficial for boats relying on limited energy sources like solar panels or generators.

The Newport 400 is engineered for ease of operation and maintenance with a user-friendly control panel. Operators can easily monitor key parameters such as water output, pressure, and system status. The intuitive interface makes it simple to adjust settings and troubleshoot potential issues. Additionally, the system is constructed from high-quality corrosion-resistant materials, ensuring durability and longevity in harsh marine environments.

An impressive characteristic of the Spectra Newport 400 is its ultra-quiet operation. This watermaker is designed to minimize noise, making it perfect for use in the close quarters of a yacht without disturbing the peace on board. The integration of advanced technologies further enhances its performance, including a sophisticated water pre-filtration system that reduces the risk of membrane fouling.

The Newport 400 is also designed with versatility in mind. It can be easily integrated into various onboard systems, allowing for simple installation and operation. Its compact size means it can fit into tight spaces on smaller vessels without sacrificing performance.

In summary, the Spectra Watermakers Newport 400 is a reliable, efficient, and quiet solution for generating freshwater in a marine environment. Its advanced reverse osmosis technology, ease of use, and robust construction make it an ideal choice for boaters seeking independence from shore-based water sources. Whether for leisurely cruising or serious ocean voyaging, the Newport 400 stands out as a top-tier watermaker for modern maritime adventures.