YSCFHC18G HIGH EFFICIENCY COOL ZONE SERIES GAS FRYERS

CHAPTER 3: INSTALLATION INSTRUCTIONS

3.2Leg and Caster Installation (cont.)

2.When positioning the fryer, gently lower it into position to prevent undue strain to the legs and internal mounting hardware. If possible, use a pallet or lift jack to lift and position the fryer. Tilting the fryer may damage the legs.

3.The rigid casters must be installed on the fryer rear channel assembly only.

B.Installation

1.Remove unit from pallet.

2.Carefully raise unit with forklift, pallet jack, or other steady means.

3.Place one lock washer on each hex head screw.

4.Insert hex head screws with lock washers [1/4-20 threads by ¾" (19 mm) long] through bolt holes of leg mounting plates and mount to the front channel. Mount rigid casters to the rear channel following the same procedure. Locknuts have been attached to the topside of the base mounting plates at the factory to capture hex head screws as they are screwed in.

5.Tighten the bolts to 50 in-lbf (5.65 joules) minimum torque.

6.After legs and rear rigid casters are installed, proceed to Step 3.3, Leveling the Fryer, to ensure the fryer is level before use.

WARNING

For caster retrofit, the unit must be at room temperature and drained of shortening

before installing the casters.

3.3 Leveling the Fryer

A.Place a level across the top of the fryer and level the unit front-to-back. If the fryer is uneven side-to-side, a platform or other surface adjustment is needed; there is no side-to-side level adjustments on a fryer equipped with caster/leg combinations (If a fryer is equipped with legs only, side to side level adjustments can be made. If a fryer is equipped with casters only, no level adjustments to the fryer can be made.). If the fryer is not level, the unit may not function efficiently, the oil may not drain properly for filtering, and it may not match adjacent units in a multi-fryer battery.

3-2

Page 14 Page 16
Page 15
Image 15
Frymaster *8196329* manual Leveling the Fryer, Installation
Page 14 Page 16

*8196329* specifications

Frymaster 8196329 is a state-of-the-art commercial fryer that is engineered to meet the demands of busy kitchens while ensuring the highest quality of frying results. Known for its reliability and efficiency, this fryer's innovative features make it a preferred choice among chefs and restaurant operators.

One of the standout features of the Frymaster 8196329 is its advanced oil filtration system. This system extends the life of the cooking oil, resulting in lower operational costs and improved food quality. The automatic filtration process removes impurities from the oil, enhancing flavor and ensuring a consistent frying experience. This feature is especially beneficial in high-volume environments, as it allows for minimal downtime and easy maintenance.

The Frymaster 8196329 is equipped with a variety of cooking controls that enhance usability. Its digital control panel offers precise temperature settings, promoting better control over the frying process. The intelligent temperature adjustment technology ensures that the oil maintains the optimal frying temperature, which is crucial for achieving perfectly crispy results. This ensures food is cooked uniformly while saving energy.

In addition to its cooking controls, the Frymaster 8196329 boasts a large capacity, accommodating various food types, from French fries to chicken wings. With multiple fry baskets, operators can cook different items simultaneously, thus increasing kitchen efficiency. The fryer's design promotes even heat distribution, which results in a consistent texture across all fried foods.

Another notable characteristic of the Frymaster 8196329 is its robust construction. Designed with heavy-duty materials, this fryer is built to withstand the rigorous demands of any commercial kitchen. The easy-to-clean surfaces and ergonomic design make maintenance less cumbersome, allowing kitchens to maintain a high standard of cleanliness.

The energy efficiency of the Frymaster 8196329 cannot be understated. With features designed to minimize energy consumption while maximizing output, it promotes a more sustainable approach to frying. This not only benefits the environment but also contributes to cost savings in the long run.

In summary, the Frymaster 8196329 embodies the perfect blend of technology, efficiency, and durability. With its advanced oil filtration system, intuitive controls, ample cooking capacity, and energy-efficient operation, it remains a top choice for those seeking high-quality performance in commercial frying applications.
Top Page Image Contents