Insignia NS-R5111 manual Using Hold, Setting the time, To use the Hold feature

Page 9

NS-R5111_14-0824_MAN_V3_ENG.fm Page 9 Thursday, August 14, 2014 6:33 PM

NS-R5111 Arm Band Radio

To recall preset stations within the selected band:

1Press the PRESET button.

2Press the TUN UP or TUN DN button to change to a different stored station.

When the batteries are low, the LCD will start flashing and eventually shut off.

Press the ON/OFF button to turn off the radio, then replace the batteries.

Note

Time must be reset after you change the batteries.

Using Hold

To use the Hold feature:

1Set the HOLD switch to ON and all buttons will be disabled. The Hold indicator appears on the LCD.

2Set the HOLD switch to OFF to enable all buttons.

Setting the time

To set the time during power off mode:

1Press and hold the STEREO/TIME SET button.

2Press the TUN UP button (hour) to set the hour, then press the TUN DN button (minute) to set the minute.

www.insigniaproducts.com9

Image 9
Contents Armband Radio Contents FeaturesWelcome Package contents Controls Using your arm band radioVolume control button # Item DisplayFlashing low battery alert Installing the batteriesTo install the batteries Operating your radioTo manually store stations To listen to your radioSetting the time Using HoldTo recall preset stations within the selected band To use the Hold featureTo release the belt clip Using the belt clipTroubleshooting SpecificationsLevel Example Safe sound levelsLegal notices Copyright FCC StatementWhat does this warranty cover? DefinitionsHow long does the coverage last? How to obtain warranty service? Where is the warranty valid?What does the warranty not cover? Contact Insignia NS-R5111 Arm Band Radio NS-R5111 Arm Band Radio V3 English