WhisperKool GSM-01, 081310 owner manual Cpsm

Page 16

Energy

1.

The ER feature can be used to save energy and aids in extending the life of the system.

Reduc-

2.

The ER button is located at the top L/H side of the control. The ER feature is activated by

tion

pressing the ER button one time, and the ER logo will appear on the digital display.

(ER)

3.

The purpose of the ER feature is to reduce energy cost, by shifting the Set Point up by 4 de-

 

grees, which will allow the cooling system to run for shorter periods of time, resulting in a reduc-

 

tion in energy cost.

 

4.

The ER feature allows for Energy Savings at any time - During periods of high ambient tem-

 

peratures, vacations or business travel.

 

5.

To deactivate the ER feature, press the ER button one time, and the ER logo will turn off.

 

6.

The ER feature can be conveniently adjusted to the customer’s specific needs, by accessing

 

the “Customer Preference Select Mode” (CPSM). See Customer Preference Select Mode Instruc-

 

tions.

 

Note: This feature is not available on the Remote Key Pad application.

Set

1.

Press the “Set” button once and it will display the Set Point. After approximately 5 seconds,

Button

the display will return to normal operation and display the Bottle Probe temperature.

 

2.

Press and hold the “Set” button for 3-5 seconds until the set point is displayed and the °F sym-

 

bol starts blinking. Next press the “UP or Down” arrows to change the Set Point. Next press the

 

“Set” button once and the Set Point numbers and the °F on the display will blink to confirm the

 

new Set Point setting.

 

3.

Press and hold the “Set” button during the display of the Hi/Low “Temperature Data History”

 

(hold button unit “rst” blinks on display), and it will erase the past recorded data file and start

 

recording, from the current time and temperature.

 

4.

Press the “Set” and the “Down Arrow” buttons simultaneously, for 3-5 seconds, and you will ac-

 

cess the “Customer Preference Selection Mode” (CPSM). The CPSM allows the customer to “Fine

 

Tune” the Control Operating System to their applicable choice.

CPSM

Press the “Set” and the “Down Arrow” buttons simultaneously, for 3-5 seconds, and you will ac-

Mode

cess the “Customer Preference Selection Mode” (CPSM). The CPSM allows the customer to “Fine

 

Tune” the Control Operating System to their applicable choice.

 

The following CPSM options are available for adjustment:

Fon – Humidity Management Enhancement: This parameter is normally set at 5, which should provide adequate relative humidity for the cellar.

•An increase in this parameter will increase the Humidity Enhancement (%RH), and a decrease in the parameter will decrease Humidity Enhancement (%RH).

•Adjustments should be made in increments of 5, with a maximum of 15, and a minimum of 0.

•After any adjustment to Humidity Enhancement, you should wait a minimum of three days before making any additional adjustments. This will allow the cellar sufficient time to accli- mate to the new setting.

Fof - Humidity Management Enhancement: This parameter is normally set at 1. This parameter should not be adjusted, as it simply provides an OFF cycle time for the fan, during the compres- sor OFF cycle. However, the parameter is located within the CPSM as a convenience to the cus- tomer, should it need to be adjusted.

Page 14

GSM-01 081310

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Coolest Thing In Wine Storage GSM-01 Table of Contents Introduction How Does a WhisperKOOL Split System Work?Customer Warranty Registration Review the Packing Slip to Verify ContentsCheck your shipment for the following contents Receiving & Inspecting the UnitPreparing the Wine Cellar Wall & Ceiling FramingInsulation Vapor BarrierHow to Build a Wine Cellar Instructional Video Unobstructed AirflowIn-Cellar Mounting DuctingSplit System Installation General Installation Guidelines and InstructionsElectrical Needs Condensing Unit PreparationInstalling the Condensing Unit Installing the Evaporator Unit Wiring SystemRefrigeration Lines Charging the System by Certified Hvac technicianRemote Keypad Installation and Configuration Ducted Installation Liquid Measuring Thermometer To use the thermostatSystem Operation Control Panel Operation Button Normal FunctionsCpsm Display Alarm Codes Maintenance Schedule Wine cellar temperature above thermostat set point TroubleshootingWater leaking from unit Compressor runs intermittently Evaporator blower runs, but compressor does not Compressor runs, but evaporator does not Evaporator coil freezesHumidity in cellar too high Wiring Diagrams Wiring.aiPlatinum Split 4000 & 8000 Condenser Terminal Board Mini-Split Evaporator Terminal Board Mini-Split Condenser Terminal Board Technical Assistance Installation Terms and Conditions WhisperKOOL Split SystemMaintenance Arbitration General Provisions Page WhisperKOOL

081310, GSM-01 specifications

The WhisperKool GSM-01,081310 is a state-of-the-art wine cellar cooling unit designed to provide optimal conditions for wine storage. This innovative model combines advanced technology with robust features to ensure that wine enthusiasts can maintain the ideal climate within their cellars.

One of the standout features of the GSM-01 is its split system design, which allows for greater versatility in installation. The cooling unit can be mounted outdoors, while the evaporator remains indoors, keeping noise levels to a minimum and ensuring a quieter environment for the wine cellar. This design not only enhances convenience but also allows for effective heat dissipation, making it an excellent choice for residential and commercial applications alike.

The WhisperKool GSM-01 operates with high efficiency, utilizing a powerful compressor that can maintain consistent temperature and humidity levels, crucial for preserving the quality and flavor of the wine. It is capable of cooling spaces up to 1,500 cubic feet, making it suitable for various cellar sizes. The temperature range is adjustable between 50°F and 65°F, allowing users to tailor the conditions to their specific wine storage requirements.

This cooling unit is equipped with advanced technology, including a digital thermostat that offers precise temperature control and monitoring. The user-friendly interface allows easy adjustments and displays the current temperature and humidity levels. Additionally, the GSM-01 features a built-in humidity control system, which helps maintain optimal humidity levels between 50% and 70%, preventing corks from drying out and spoiling the wine.

Another significant characteristic of the WhisperKool GSM-01 is its reliability. The unit is designed to withstand harsh environmental conditions, and the components are crafted from high-quality materials, ensuring longevity and consistent performance. The unit also comes with a warranty, providing peace of mind to users regarding its durability.

Furthermore, the WhisperKool GSM-01 emphasizes energy efficiency, ensuring that wine collectors can keep their cellars at the right temperature without incurring excessive electricity costs. The unit meets or exceeds Energy Star standards, underlining its commitment to sustainability.

In summary, the WhisperKool GSM-01,081310 is a premier choice for anyone looking to invest in a reliable and efficient wine cellar cooling solution. With its split system design, superior temperature and humidity control, and energy efficiency, it offers exceptional functionality tailored to protect and enhance wine storage. This combination of features makes it a vital tool for serious wine enthusiasts and collectors alike.
Top Page Image Contents