WhisperKool GSM-01 Split System Installation, General Installation Guidelines and Instructions

Page 8

SPLIT SYSTEM INSTALLATION

General Installation Guidelines and Instructions

WhisperKOOL requires that a certified HVAC technician install and charge all split systems. Please take a moment to review state and city building codes to ensure the safe and proper installation of the system.

Electrical Needs

WhisperKOOL split systems requires a dedicated 110-volt 20-amp circuit. The system draws a large amount of amps at initial start up. By designating a dedicated circuit breaker, you will guarantee that the system has enough power to run effectively. Contact an electrician for assistance with the installation of this dedicated electrical circuit:

1.Match the electrical outlet to the plug provided on the WhisperKOOL unit.

2.Provide a dedicated circuit and wiring for the unit.

3.Provide a weatherproof plug for units mounted outside.

WE RECOMMEND THAT YOU DO NOT USE A GROUND FAULT INTERRUPTER (GFI) WITH THIS PRODUCT. In case the system should lose power, press the reset button and attempt to turn the unit back on. Check the home/main circuit breaker. If the unit does not respond properly, refer to the Troubleshooting section

on page 17.

Condensing Unit Preparation

Note: The condensing unit is shipped with a protective foam pad/ block to prevent damaging tubing against the condenser coil fins. Please ensure that this pad is removed prior to operation.

*A Low Ambient Control is used on most models, a Fan Cycling Switch is used otherwise.

Page 6

GSM-01 081310

Image 8
Contents Coolest Thing In Wine Storage GSM-01 Table of Contents Introduction How Does a WhisperKOOL Split System Work?Customer Warranty Registration Review the Packing Slip to Verify ContentsCheck your shipment for the following contents Receiving & Inspecting the UnitPreparing the Wine Cellar Wall & Ceiling FramingInsulation Vapor BarrierHow to Build a Wine Cellar Instructional Video Unobstructed AirflowIn-Cellar Mounting DuctingSplit System Installation General Installation Guidelines and InstructionsElectrical Needs Condensing Unit PreparationInstalling the Condensing Unit Installing the Evaporator Unit Wiring SystemRefrigeration Lines Charging the System by Certified Hvac technicianRemote Keypad Installation and Configuration Ducted Installation Liquid Measuring Thermometer To use the thermostatSystem Operation Control Panel Operation Button Normal FunctionsCpsm Display Alarm Codes Maintenance Schedule Water leaking from unit TroubleshootingWine cellar temperature above thermostat set point Compressor runs intermittently Evaporator blower runs, but compressor does not Compressor runs, but evaporator does not Evaporator coil freezesHumidity in cellar too high Wiring Diagrams Wiring.aiPlatinum Split 4000 & 8000 Condenser Terminal Board Mini-Split Evaporator Terminal Board Mini-Split Condenser Terminal Board Technical Assistance Installation Terms and Conditions WhisperKOOL Split SystemMaintenance Arbitration General Provisions Page WhisperKOOL

081310, GSM-01 specifications

The WhisperKool GSM-01,081310 is a state-of-the-art wine cellar cooling unit designed to provide optimal conditions for wine storage. This innovative model combines advanced technology with robust features to ensure that wine enthusiasts can maintain the ideal climate within their cellars.

One of the standout features of the GSM-01 is its split system design, which allows for greater versatility in installation. The cooling unit can be mounted outdoors, while the evaporator remains indoors, keeping noise levels to a minimum and ensuring a quieter environment for the wine cellar. This design not only enhances convenience but also allows for effective heat dissipation, making it an excellent choice for residential and commercial applications alike.

The WhisperKool GSM-01 operates with high efficiency, utilizing a powerful compressor that can maintain consistent temperature and humidity levels, crucial for preserving the quality and flavor of the wine. It is capable of cooling spaces up to 1,500 cubic feet, making it suitable for various cellar sizes. The temperature range is adjustable between 50°F and 65°F, allowing users to tailor the conditions to their specific wine storage requirements.

This cooling unit is equipped with advanced technology, including a digital thermostat that offers precise temperature control and monitoring. The user-friendly interface allows easy adjustments and displays the current temperature and humidity levels. Additionally, the GSM-01 features a built-in humidity control system, which helps maintain optimal humidity levels between 50% and 70%, preventing corks from drying out and spoiling the wine.

Another significant characteristic of the WhisperKool GSM-01 is its reliability. The unit is designed to withstand harsh environmental conditions, and the components are crafted from high-quality materials, ensuring longevity and consistent performance. The unit also comes with a warranty, providing peace of mind to users regarding its durability.

Furthermore, the WhisperKool GSM-01 emphasizes energy efficiency, ensuring that wine collectors can keep their cellars at the right temperature without incurring excessive electricity costs. The unit meets or exceeds Energy Star standards, underlining its commitment to sustainability.

In summary, the WhisperKool GSM-01,081310 is a premier choice for anyone looking to invest in a reliable and efficient wine cellar cooling solution. With its split system design, superior temperature and humidity control, and energy efficiency, it offers exceptional functionality tailored to protect and enhance wine storage. This combination of features makes it a vital tool for serious wine enthusiasts and collectors alike.