Windsor 10066270, HCC172, SCHC172 Checking Gravity, Battery Condition, To Charge the Batteries

Page 17

CHECKING BATTERY SPECIFIC GRAVITY Use a hydrometer to check the battery specific gravity.

Battery Check

CHECKING GRAVITY

A.Hydrometer

B.Battery

NOTE: Do not take readings immediately after adding distilled water, if the water and acid are not thoroughly mixed, the reading may not be accurate.

Check the hydrometer readings against this chart.

SPECIFIC GRAVITY

BATTERY CONDITION

@ 80° F (27°C)

 

1.265

100% CHARGED

1.225

75% CHARGED

1.190

50% CHARGED

1.155

25% CHARGED

1.120

DISCHARGED

NOTE: If the readings are taken when the battery electrolyte is any temperature other than 80°F (27°C), the reading must be temperature corrected.

To find the corrected specific gravity reading when the temperature of the battery electrolyte is other than 80°F (27°): Add (+) to the specific gravity reading 0.004 (4 points), for each 10°F (6°C) above 80° (27°C).

Subtract (-) from the specific reading 0.004 (4 points), for each 10°F (6°C) below 80°F (27°C)

MAINTENANCE

TO CHARGE THE BATTERIES

When servicing machine, avoid contact with battery acid.

Batteries emit hydrogen gas. Explosion or fire can result. Keep sparks and open flame away. Keep covers open when charging.

Wear eye protection and protective clothing when working with batteries.

Charge batteries in a well ventilated area. Leave the solution tank open.

MACHINES EQUIPPED WITH ONBOARD CHARGER

1.Fully open Recovery Tank/Battery Cover or prop in partially open position using bracket (included). This will provide additional venting of batteries during charging cycle.

2.Connect charger’s AC power cord to AC mains. The charger’s YELLOW “AC” LED will light.

NOTE: When charger is energized, all machine function will shut down.

3.After several seconds, the charger’s green LED will flash to indicate that charging is in process.

NOTE: If no lights are illuminated, or yellow LED flashes, refer to the charger Product Manual Troubleshooting section.

4.When charging is complete, both the yellow and green LEDs will remain on. The charger is now in standby mode.

5.Disconnect charger’s AC power cord.

6.Raise battery cover and check the battery electrolyte level. It should be up to the indicator ring. If necessary, add distilled water.

7.Lower the battery cover

NOTE: For additional information about battery charger function, please see the charger Product Manual.

86221970 17” SCRUBBER 01/03/07

4-2

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Automatic Scrubber Overview Machine Data LOG/OVERVIEWTable of Contents HOW to USE this Manual Read ALL Instructions Before Using this Machine Important Safety InstructionsHazard Intensity Level Hazard Intensity LevelSafety Label Location DIMENSION/CAPACITY Technical SpecificationsSpecial Notes MeasureHOW this Machine Works Components Squeegee Lift Lever ControlsCircuit Breakers Brush SwitchHour Meter Machine Operations Filling Solution TankPRE-RUN Machine Inspection Normal ScrubbingSolution Tank Emptying and Cleaning TanksRecovery Tank Machine OperationBatteries WET Cell Batteries only MaintenanceBattery Maintenance Checking Gravity Battery ConditionTo Charge the Batteries Machines Equipped with Onboard ChargerMachine stop on level surface, turn off machine Machines Without Onboard Charger Changing BatteriesFinished Floors Scrub BrushesUncoated Floors To Remove Squeegee Assembly Installing Scrub BrushesReplacing or Removing Scrub Brushes Squeegee BladesService Schedule Troubleshooting Problem Cause Solution Troubleshooting86221970 17 Scrubber 01/03/07

10066210, 10066270, 10052700, SCH172, 10066230 specifications

Windsor is a renowned name in the realm of technology and innovation, prominently recognized for its advanced cooling solutions and HVAC technologies. Within its impressive portfolio, models such as SCHC172, SCC172, QSCC172IA, 10066260, and 10066220 stand out due to their remarkable features and capabilities.

The SCHC172 model is designed specifically for high-efficiency cooling applications, ideal for both commercial and industrial use. One of its main features includes a robust compressor that significantly enhances the unit's performance and reliability. This model operates with variable speed technology, allowing for better energy management and cost-effectiveness while maintaining optimal cooling conditions.

SCC172, on the other hand, is engineered with a focus on sustainability. It utilizes eco-friendly refrigerants that comply with contemporary environmental standards, minimizing the carbon footprint associated with cooling systems. Moreover, it incorporates advanced diagnostic capabilities that facilitate real-time monitoring and maintenance, ensuring the unit operates at maximum efficiency.

The QSCC172IA model takes innovation a step further by integrating smart technology. This model features an IoT-enabled interface that allows for remote operation and monitoring. Users can control the cooling settings from their smartphones or computers, providing unprecedented convenience and control. The QSCC172IA also includes automated energy-saving features that adjust the system based on current load requirements.

Models 10066260 and 10066220 are tailored for specific industrial applications, featuring heavy-duty construction that withstands rigorous operational conditions. These models boast superb thermal performance and are composed of corrosion-resistant materials that extend their lifespan. With user-friendly interfaces and customizable settings, they can cater to a variety of cooling requirements.

Collectively, these models from Windsor exemplify the brand's commitment to innovation, efficiency, and sustainability in the HVAC sector. By incorporating advanced technologies, eco-friendly materials, and user-focused designs, Windsor not only meets the demanding cooling needs of today's industries but also leads the charge towards a more sustainable future. Their models embody the balance of performance and responsibility that modern consumers seek in technologically advanced cooling solutions. Whether for industrial, commercial, or smart environments, Windsor's products deliver high efficiency and reliability, ensuring comfort and performance year-round.
Top Page Image Contents