Troubleshooting


Poor or no water pick-up	Debris caught on squeegee	Remove debris

	Worn squeegee blades	Replace squeegee blades
	Vacuum hose clogged	Clear obstruction from hose

	Vacuum hose disconnected	Reconnect vacuum hose
	from squeegee or recovery
	tank
	Vacuum hose damaged	Replace vacuum hose

	Vacuum motor inlet screen	Clean inlet screen
	dirty
	Recovery tank not sealed	Check vacuum motor
		position. Replace damaged
		seal.
	Foam filling recovery tank	Empty recovery tank
		Use less or different
		detergent
		Use defoamer
Vacuum motor does not run, or runs	Recovery tank full	Drain recovery tank
slowly
	Circuit breaker tripped	Reset circuit breaker

	Loose connection	Check motor wires and
		connections
	Faulty vacuum contractor	Replace contactor
	Worn vacuum motor brushes	Replace brushes, check
		commutator
Poor scrubbing performance	Debris caught in scrub brush	Remove debris
	Worn brush or pad	Replace brush or pad

	Improper detergent, brush or	Contact equipment or
	pad used	application specialist
	Low scrub brush down	Increase brush pressure
	pressure
	Low battery charge	Charge batteries

Brush motor does not run, or runs	Circuit breaker tripped	Reset circuit breaker
slowly
	Loose connection	Check motor wires and
		connection
	Faulty brush motor contactor	Replace contactor

	Worn brush motor brushes	Replace brushes, check
		commutator

4-7	86221970 17” SCRUBBER 01/03/07

10066210, 10066270, 10052700, SCH172, 10066230 specifications

Windsor is a renowned name in the realm of technology and innovation, prominently recognized for its advanced cooling solutions and HVAC technologies. Within its impressive portfolio, models such as SCHC172, SCC172, QSCC172IA, 10066260, and 10066220 stand out due to their remarkable features and capabilities.

The SCHC172 model is designed specifically for high-efficiency cooling applications, ideal for both commercial and industrial use. One of its main features includes a robust compressor that significantly enhances the unit's performance and reliability. This model operates with variable speed technology, allowing for better energy management and cost-effectiveness while maintaining optimal cooling conditions.

SCC172, on the other hand, is engineered with a focus on sustainability. It utilizes eco-friendly refrigerants that comply with contemporary environmental standards, minimizing the carbon footprint associated with cooling systems. Moreover, it incorporates advanced diagnostic capabilities that facilitate real-time monitoring and maintenance, ensuring the unit operates at maximum efficiency.

The QSCC172IA model takes innovation a step further by integrating smart technology. This model features an IoT-enabled interface that allows for remote operation and monitoring. Users can control the cooling settings from their smartphones or computers, providing unprecedented convenience and control. The QSCC172IA also includes automated energy-saving features that adjust the system based on current load requirements.

Models 10066260 and 10066220 are tailored for specific industrial applications, featuring heavy-duty construction that withstands rigorous operational conditions. These models boast superb thermal performance and are composed of corrosion-resistant materials that extend their lifespan. With user-friendly interfaces and customizable settings, they can cater to a variety of cooling requirements.

Collectively, these models from Windsor exemplify the brand's commitment to innovation, efficiency, and sustainability in the HVAC sector. By incorporating advanced technologies, eco-friendly materials, and user-focused designs, Windsor not only meets the demanding cooling needs of today's industries but also leads the charge towards a more sustainable future. Their models embody the balance of performance and responsibility that modern consumers seek in technologically advanced cooling solutions. Whether for industrial, commercial, or smart environments, Windsor's products deliver high efficiency and reliability, ensuring comfort and performance year-round.