Windsor ADM8, 10080170 operating instructions Service Schedule, Maintenance

MAINTENANCE

SERVICE SCHEDULE

MAINTENANCE	DAILY	WEEKLY	QUARTERLY
Check machine for cord damage	*
Check recovery dome and gasket for
damage and cleanliness	*
Check brush – should be clean with no
lint or strings attached	*
Inspect vac shoe for blockage; remove
fibers with coat hanger, etc.	*
Check hoses for wear, blockages, or
damage	*
Check handles, switches, and knobs
for damage	*
Check vac motor intake filter and clean	*
Run one gallon of water through
system	*
Clean out recovery tank and check
float valve to make sure it moves freely	*
Clean out solution tank and remove
and clean vacuum intake screen	*
Clean outside of all tanks and check for
damage	*
Run vac motor for at least one minute
to allow motor to dry	*
Store with dome off tank to allow the
tank to dry	*
Check all bearings for noise		*
Check all gaskets for wear and leakage		*
Check vacuum intake screen for
damage; replace if necessary		*
Check pump pressure; observe spray
pattern and check with gauge if
necessary		*
Check and clean solution screen		*
Check belts for wear and replace as
necessary		*
Check brush for wear; ensure bristles
are not damaged		*
Check cables for fraying		*
Check the spray bar (manifold) for
damage; replace if broken or bent		*
Check condition of vac shoe and frame
for damage		*
Check overall performance of machine		*
Check vac motor carbon brushes			*

4-1 ADMIRAL 86038230 03/16/07