Windsor 86221950 manual Periodic Maintenance

Page 9

DAILY MAINTENANCE:

Follow same procedure for Shut Down and Storage.

PERIODIC MAINTENANCE:

1.Twice a month, flush a white vinegar solution (one quart vinegar to two gallons water) or anti- browning solution (mixed as directed) through the extractor. This will prevent build-up of alkaline residue in the system.

2.If spray jet becomes clogged, remove the spray tip, wash it thoroughly, and blow dry. NOTE: DO

NOT USE PINS, WIRE, ETC. TO CLEAN NOZZLE AS THIS COULD DESTROY THE SPRAY PATTERN.

3.Apply silicone lubricant to solution nipple.

4.Periodically inspect all hoses, electrical cable and connections on your machine. Frayed or cracked hoses should be repaired or replaced to eliminate vacuum or solution pressure loss. If the cable insulation on the power cord is broken or frayed, repair or replace immediately. Don’t take chances with electrical fire or shock.

Only qualified maintenance personnel are to perform the following repairs.

SOLUTION PUMP REPLACEMENT:

1.Turn off all switches and unplug the machine.

2.Unlatch and remove recovery tank.

3.Unfasten screws holding vacuum motor housing to solution tank.

4.Unfasten screws holding pump plate to bottom of solution tank.

5.Remove solution hoses from fittings on pump.

6.Remove pump from brackets and remove fittings and grounding wire.

7.Reverse process to install new replacement pump.

MAINTENANCE

VACUUM MOTOR REPLACEMENT:

1.Turn off all switches and unplug machine.

2.Unlatch and remove recovery tank.

3.Unfasten screws holding vacuum motor retainer to vacuum motor housing

4.Lift vacuum motor from vacuum motor housing. Locate the vacuum motor wires and disconnect at the connector.

5.Remove vacuum motor.

6.Reverse process to install vacuum motor replacement.

Vacuum Motor Carbon Brushes Replacement

 

End Cap

Carbon

WARNING: The green

Brushes

ground wire must be

 

attached for safe operation.

 

See wiring diagram.

If armature commutator is grooved, extremely pitted or not concentric, the motor will need to be replaced or sent to a qualified service center.

Important:

These brushes wear quicker as the length shortens due to increased heat. Spring inside brush housing will damage motor if brushes are allowed to wear away completely.

38 [9.5mm]

Periodically check the length of the carbon brushes. Replace both carbon brushes when either is less than 3/8" (9.5mm) long.

86221950 02/20/07

4-1

Page 8 Page 10
Image 9
Page 8 Page 10
Contents MINI-EXTRACTOR Model Machine Data LOG/OVERVIEWTable of Contents Model HOW to USE this ManualImportant Safety Instructions Do not Operate Machine Hazard Intensity LevelElectrical Grounding InstructionsGrounding Instructions Machine OperationsPeriodic Maintenance MaintenanceProblem Cause Solution Troubleshooting86221950 04/27/07 86221950 04/27/07 PRV no QTY Description Extractor GroupSolution Pump Group PRV no QTY Description Serial no From HOSE, 3/8ID WireboundSems BRACKET, Solenoid PumpWiring Diagram WASHER, #10 Lock EXT Star SS Wiring Parts ListHand Tool Hose ASM, VAC/SOLUTION OKA HOUSING, Handtool Spotter OKAHTO Hand TOOL, Spotter OKA Entire Assembly AS KIT PRV no Description Serial no FromMini Cart Pmct Mini Cart Entire Assembly AS KIT PLATE, WeldmentWASHER, M8 Flat DIN125A PLT Cart TUBE, Cart Handle PRV no DescriptionNUT, 1/2 Star Lock PUSH-ON NUT, 10-32 HEX W/ Star WasherSuggested Spare Parts

86221950 specifications

Windsor 86221950 is a notable entity that has garnered attention in various sectors, particularly in industrial and technological applications. This model is often celebrated for its innovative features and cutting-edge technology, aligning with modern demands for efficiency, productivity, and sustainability.

One of the primary features of Windsor 86221950 is its robust build quality. Designed with high-grade materials, it ensures durability and longevity. This makes it an ideal choice for businesses that require reliable equipment capable of withstanding rigorous usage in demanding environments.

In terms of technological advancements, Windsor 86221950 incorporates state-of-the-art electronics that allow for enhanced performance and intuitive operation. Its control systems are equipped with advanced software, enabling precision in operation and a user-friendly interface. This technology not only aids in optimal functionality but also allows for real-time monitoring and diagnostics, minimizing downtime and ensuring consistent production quality.

Another significant characteristic of Windsor 86221950 is its energy efficiency. With an increasing global emphasis on sustainable practices, this model is designed to minimize energy consumption while maximizing output. This not only reduces the operational costs for businesses but also aligns with environmental sustainability goals.

The adaptability of Windsor 86221950 is also a crucial aspect, making it suitable for various applications. Whether in manufacturing, logistics, or service maintenance, this model can be tailored to meet specific operational requirements. This flexibility makes it a preferred choice for industries looking to streamline processes without compromising on quality or performance.

Furthermore, Windsor 86221950 has received positive feedback for its low maintenance requirements. Its engineering allows for easy servicing, reducing the need for frequent repairs and associated costs. This reliability is a vital consideration for businesses that seek to maintain operational continuity without interruption.

In conclusion, Windsor 86221950 stands out due to its remarkable features, advanced technologies, and practical characteristics. Its durability, energy efficiency, adaptability, and low maintenance make it an excellent investment for industries looking to enhance their operational capabilities while committing to sustainable practices. This model represents a fusion of innovation and practicality, making it a significant player in its field.
Top Page Image Contents